Jump to content
SAU Community

Recommended Posts

Hey guys I was just looking at the Tein japan website and the spring kits for them have different models:

For e.g. The G35 has two different spring kits available: The S-Tech and the H-Tech, the S-tech giving a lower drop than H-tech. While if you look up the 350GT it's only got the H-tech available for them and not only that, the drop isn't as low as either of the kits available for the G35. Can anybody shed some light on this? Aren't they the same car which should mean they should have the same suspension?

Note. Car is Nissan skyline V36 sedan 4 350GT 2007/ Infinit G35 Sedan 4 Door 2007

I'll give my 2 cents worth here rather than over on G35driver.... It could be that they offer a number of different models in the G35 including an all wheel drive version - they have (as far as I can tell) the base, Journey, Sport and X which is AWD. This may be the reason, perhaps others can confirm and/or deny. From what I've read on G35driver with the Tein there is a good chance you'll need a camber kit whereas with the Eibach maybe not - again probably some experience in here that can confirm.

Edited by Skylinetragic

yep the year models in the US are "wrong" compared to japan. they started 2 years behind, and somewhere later they became just 1 year behind.

usually referring to a series one or series 2 of a particular body type (35, 36, 37) if applicable will be more accurate than the actual year.

the G37 is the V36 370GT, the G35 covers our V35 and V36 350GT.

The infiniti model numbers signify the engine size not the series.. the G25 is the V36 250GT.

I think Brad is probably on the right track.. the AWD G35 will have some differences.. as far as I know the RWD G35 (up to 2006) suspension setup is the same as our V35.

the G37 is the V36 370GT, the G35 covers our V35 and V36 350GT.

The infiniti model numbers signify the engine size not the series.. the G25 is the V36 250GT.

I think Brad is probably on the right track.. the AWD G35 will have some differences.. as far as I know the RWD G35 (up to 2006) suspension setup is the same as our V35.

^^^^^^^^^^^^^^^^^^^

Hahaha there you are Brad! good to see you on here as well! Again thanks for the reply guys, so would it be safe to assume the spring kit I order from Tein Japan for a JDM V36 should fit regardless if my model is a USDM G35? Being both RWD they should right?

the G37 is the V36 370GT, the G35 covers our V35 and V36 350GT.

The infiniti model numbers signify the engine size not the series.. the G25 is the V36 250GT.

I think Brad is probably on the right track.. the AWD G35 will have some differences.. as far as I know the RWD G35 (up to 2006) suspension setup is the same as our V35.

AWD G35 is the same suspension setup as AWD M35 Stagea's (2001-2007)... either NM35 or PM35.

Hahaha there you are Brad! good to see you on here as well! Again thanks for the reply guys, so would it be safe to assume the spring kit I order from Tein Japan for a JDM V36 should fit regardless if my model is a USDM G35? Being both RWD they should right?

Same car, same suspension.

Hahaha there you are Brad! good to see you on here as well! Again thanks for the reply guys, so would it be safe to assume the spring kit I order from Tein Japan for a JDM V36 should fit regardless if my model is a USDM G35? Being both RWD they should right?

What makes you think your car is a USDM G35? I assume you have a V36 and someone has put Infiniti badges on it. You cannot import G35s into Australia, and they are all LHD.

Thanks again guys for the replies, I appreciate the input and it's cleared up my confusion on the topic.

Andrew I ordered a V36 but I asked my importer to check for me and his said it's a G35 model because he saw the analogue clock on the dash (apparently USDM only) and although it's debadged the steering wheel symbol is infinity not G35 hence the confusion.

Is it left hand drive? The clock can be added and the steering wheel changed easy enough. I am quite certain that under RAWS G35s in any form cannot be imported. Unless it is a convertible out of Europe - there are a few of those floating around - pretty sure they only started making those in 2009 though.

smoke and mirrors can turn a G35 into a V35, didnt you know? headlights arent a problem either

also youre right, there are NO USDM G35/36/37s in australia and registered. maybe there are a few track only ones.

Almost.. G35 = V35 350GT and V36 350GT (sometimes called 2nd gen G35). G37 = V36 370GT.

The Infiniti model numbers signify engine size... thus no G36 as there is no 3.6L version..

There is now an Infiniti G25.. as you can guess it is basically a V36 250GT..

Same applies for the rest of the Infiniti models.. eg. M37 is a 3.7L V6.. M56 is a 5.6L V8.. etc..

Currently true.. all G37s will look that same as our V36..

but the 2007+ G35 is also the same as our V36.. and if the next series of skyline (V37), has a 3.7L engine, it will also be called a G37 in USA. So it could be potenitally misleading to make a direct G vs V comparson.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
×
×
  • Create New...