Jump to content
SAU Community

Recommended Posts

Hey guys, my dad's 250GT s2 was involved in an accident, and today I went down to a repairer to get a quote on the cost to fix it so I can send it down to the insurance company. The smash repair guy said its a write off for sure, by chance there was a NRMA assessor their who also said it would be a write off according to him. So the smash repairer is still going to write an appropriate quote so I can send it.

Anyway if the insurance assessor also agree's and says its a write off im wondering who can I get to assess the value of the car so I don't get a bad price on the market value the assessor from the involved insurance company gives me and also so I have some back up that he is low balling the car.

p.s wasn't at fault in the accident, it was a pile up...

Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/
Share on other sites

Most insurance companies will have a set value for the car, if you have comprehensive insurance, it should be listed on the policy.. if you don't have comprehensive insurance and you are relying on the insurance of the 'at fault' vehicle.. it could get a bit tricky if that company doesn't insure imports, as they may not have a listed market value. - in this case you might want to try calling a few insurance companies who do insure imports and ask what value they would insure it for.. that way you have some ammunition if you feel it gets undervalued.

Edited by sonicii
Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6441639
Share on other sites

So what is the agreed or market value on your insurance policy? If its anywhere above $13K, accept the write off, take the money and buy something else.

Don't take the chance of it being repaired properly because it won't be the same regardless and if anything will make it harder to sell in the future if it has an accident history.

Edited by n15m0
Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6441834
Share on other sites

They might be writing it off as it is in the "too hard basket". That's what happened with my Stagea. Estimated repair bill was around the $10k mark. Agreed value was considerably more than that. Too hard to repair so got the payout.

Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6441848
Share on other sites

It would have been worked out based on a % of the agreed value. If cost of repair exceeds this % then its a write off. There is no benefit for the repairer to low ball you as if the amount of work required + the cost is too high it would be deemed as a write off by the insurer anyway.

Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6441858
Share on other sites

well the situation as said by the repairer on the quick look he had stated some bad things about it, said things like we would have to take the whole cabin out and fix it and that's if it can be fixed as some of it might not be able to be put to place or redone (something along those lines) said the rails have had damage and the front and rear reo's have had it (this is also minus addition of repairing the actual bumpers and hood and boot and exhaust system).

I also called the repair guy today he will have my quote ready to email today but he didn't get back to me so ill make my way down there and see what happens.

quick question about the price/value, say it is a write off and the insurance say they will give 10k, obviously its low balling, what can i do in that instance

forgot to mention that the car is only 3rd party.

Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6443071
Share on other sites

I think the cut off for repairs is more than 20% in most cases.. I have know people with $30,000 cars which needed $12,000 of repairs after an accident and the insurance company repaired it. From what I understood (but could be wrong) the cut off is 20% less than the value of the car. so if the car is insured for $10,000 and repairs will be more than $8,000, then it's a write off. it doesn't make much financial sense for an insurance company to pay out $10,000 for a write off, when they could have paid $2,500 in repairs.

To the OP, if you don't have comprenhensive insurance, then you might not have much to go on if you get a 'low ball' figure. all I can suggest is ring a few insurance companies and find out how much they would insure your car for (if it wasn't damaged), companies like shannons or just cars (to mention a few). You can then go back to the insurance company making the low offer and ask them to increse it based on the figures you get.

Maybe have a look on car sales and see how much a similar car is selling for.. this might help your case too.

However, if they feel they can justify their figure, I don't like your chances of getting it incresed.. especially since you aren't one of their customers.

You could try going to your 3rd party insurance company and see if there is anything they can do from their side (assuming you mean 3rd party property, not 3rd party compulsory included in your rego). But I doubt there is much they can do either.

Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6443329
Share on other sites

Look at it this way, my 1989 Skyline wagon with the lower half re-sprayed with rattle cans was written off last year when i was in a not at fault accident.

The at fault persons insurance company offered me $2800 minus $150 for the wrecking fee.

I bought the car for a slab of VB, let my old man drive the BMW I had because his car was rooted.

Don't think negative and wait. I had my stuff sorted within a week.

Edited by Manya
Link to comment
https://www.sau.com.au/forums/topic/404602-car-valuation/#findComment-6443558
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Did this end up working? Did you take some pictures?
    • And finally, the front lower mount. It was doubly weird. Firstly, the lower mount is held in with a bracket that has 3 bolts (it also acts as the steering lock stop), and then a nut on the shock lower mount itself. So, remove the 3x 14mm head bolts , then the 17mm nut that holds the shock in. From there, you can't actually remove the shock from the lower mount bolt (took me a while to work that out....) Sadly I don't have a pic of the other side, but the swaybar mounts to the same bolt that holds the shock in. You need to push that swaybar mount/bolt back so the shock can be pulled out past the lower control arm.  In this pic you can see the bolt partly pushed back, but it had to go further than that to release the shock. Once the shock is out, putting the new one in is "reverse of disassembly". Put the top of the shock through at least one hole and put a nut on loosely to hold it in place. Put the lower end in place and push the swaybar mount / shock bolt back in place, then loosely attach the other 2 top nuts. Bolt the bracket back in place with the 14mm head bolts and finally put the nut onto the lower bolt. Done....you have new suspension on your v37!
    • And now to the front.  No pics of the 3 nuts holding the front struts on, they are easy to spot. Undo 2 and leave the closest one on loosely. Underneath we have to deal with the wiring again, but this time its worse because the plug is behind the guard liner. You'll have to decide how much of the guard liner to remove, I undid the lower liner's top, inside and lower clips, but didn't pull it full off the guard. Same issue undoing the plug as at the rear, you need to firmly push the release clip from below while equally firmly gripping the plug body and pulling it out of  the socket. I used my fancy electrical disconnect pliers to get in there There is also one clip for the wiring, unlike at the rear I could not get behind it so just had to lever it up and out.....not in great condition to re-use in future.
    • Onto the rear lower shock mount. It's worth starting with a decent degrease to remove 10+ years of road grime, and perhaps also spray a penetrating oil on the shock lower nut. Don't forget to include the shock wiring and plug in the clean.... Deal with the wiring first; you need to release 2 clips where the wiring goes into the bracket (use long nose pliers behind the bracket to compress the clip so you can reuse it), and the rubber mount slides out, then release the plug.  I found it very hard to unplug, from underneath you can compress the tab with a screwdriver or similar, and gently but firmly pull the plug out of the socket (regular pliers may help but don't put too much pressure on the plastic. The lower mount is straightforward, 17mm nut and you can pull the shock out. As I wasn't putting a standard shock back in, I gave the car side wiring socket a generous gob of dialectric grease to keep crap out in the future. Putting the new shock in is straightforward, feed it into at least 1 of the bolt holes at the top and reach around to put a nut on it to hold it up. Then put on the other 2 top nuts loosely and put the shock onto the lower mounting bolt (you may need to lift the hub a little if the new shock is shorter). Tighten the lower nut and 3 upper nuts and you are done. In my case the BC Racing shocks came assembled for the fronts, but the rears needed to re-use the factory strut tops. For that you need spring compressors to take the pressure off the top nut (they are compressed enough when the spring can move between the top and bottom spring seats. Then a 17mm ring spanner to undo the nut while using an 8mm open spanner to stop the shaft turning (or, if you are really lucky you might get it off with a rattle gun).
    • You will now be able to lift the parcel shelf trim enough to get to the shock cover bolts; if you need to full remove the parcel shelf trim for some reason you also remove the escutcheons around the rear seat release and you will have to unplug the high stop light wiring from the boot. Next up is removal of the bracket; 6 nuts and a bolt Good news, you've finally got to the strut top! Remove the dust cover and the 3 shock mount nuts (perhaps leave 1 on lightly for now....) Same on the other side, but easier now you've done it all before
×
×
  • Create New...