Jump to content
SAU Community

Recommended Posts

Hey guys,

Can anyone recommend a good cheap lowering option for my R33 GTS-T (1994).

It has been suggested to me to get a set of King Springs and lower it with them.

Not the Super lows' , but just enough to make it look a bit slicker! About 30mm.

I do intend in the future (12 months or so) to get some Tein adjustable suspension, but until the pesos materialises I would like a cheap alternative that won't make the ride to stiff as I drive it 500k's per week!!

Look forward to your responses.

Cheers,

J-Flash.

Link to comment
https://www.sau.com.au/forums/topic/40477-good-cheap-lowering-options/
Share on other sites

thats as cheap as it gets mate.....other than choppin ur springs which i hope nobody does anymore:D:D good advice is to shop around for prices and ask if peeps know anyone if u know what i mean. my mate scored a set of brand new kings for $150 on all corners of a mates mate.....and we spent a good couple hrs puttin it in....BARGAIN!!

thats as cheap as it gets mate.....other than choppin ur springs which i hope nobody does anymore:D:D  good advice is to shop around for prices and ask if peeps know anyone if u know what i mean.  my mate scored a set of brand new kings for $150 on all corners of a mates mate.....and we spent a good couple hrs puttin it in....BARGAIN!!

MR_Fanny,

Did ya lose any smoothness in your ride. Does it hit the bumps any harsher!

I'd rather do nothin' if the difference is significant.

Thanks for ya comments. Ya couldn't get me a set at thta price could ya! wink wink nudge nudge.LOL

Cheers,

J-Flash

At all cost do not chop your springs.... Get a proper lowered springs like King Springs you won't regret it.  

Get a progressive rate spring, it will stiffen up under heavy load/cornering but is comfy for cruising.

i lowered mine with r33gtr front shocks and springs(bolt straight in)

back shocks were fitted with gtr springs

front is 50mm lower than standard

rear is about 30mm lower than standard

lots of gtr shocks floating around cheap coss everyone fits flashy shocks to them!!!

ride is actually better with these fitted than standard

cheers

I can go one better...

256hotlne.jpg

Meet HOTLNE... a perfect example of what not to do to your car... this mucus coloured R33 sporting vinyls that were bubbled, wrinkled and peeling off, also had a unique modification of NO SPRINGS.

yes the driver had the car sitting on its tyres, and drove around with no springs from the 2003 VIC Glo Show back to whichever rock it crawled out from under.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...