Jump to content
SAU Community

Recommended Posts

So,

If I boot it and then stop shortly there after, I get a sulphur smell in the car. Also if I go up a really steep hill on approx 2.5-5psi, so just holding revs while going 110 that same smell creeps into the car.

My cat is only about 6k km old.

I have also tightened up the bolts around the cat.

What else could be causing me this stinky smell?

Link to comment
https://www.sau.com.au/forums/topic/405107-why-do-i-smell-egg/
Share on other sites

It's most likely nothing to worry about mate, most petrols have sulfur in the additives. Some are better/worse smelling than others. Are you filling up from the same petrol station every time, or have you recently filled up at a station you don't normally fill up at?

Ah indeed it is a 100cell cat. stupid cat.

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

Haha, didnt even think a container of fried rice could fit in the glovebox.

Ah well, the life of running a cat i spose. Decat pipe one day

On the topic of cats, my cars been tuned on no cat, im fitting a 100 cell cat, with a 4 inch body on a 3 inch pipe, will it change the tune much? and for lean or rich? Im getting a retune after just not sure if I should baby it before tune with new cat. Running 338kw on 22 psi. On caltex 98

Any help would be good thanks

Depends on how much it flows, if it is a restriction then it will change the load points. But if it's a well flowing cat then it shouldn't change the tune much at all. I did a back to back test on my car with the exhaust on/off from the front pipe back, made hardly any difference.

Safest to get it checked first, but you shouldn't have to baby it TOO much.

just for sake of conversation my work ute does this too but only sometimes. its an 04 holden rodeo 3.5l v6 and the only unusual thing about this car is that it chews through the oil. i will do an oil change or really top up about every 4 months and only about 500ml will come out. so, maybe the smell might also have something to do with oil consumption.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
    • Nah, that is hella wrong. If I do a simple linear between 150°C (0.407v) and 50°C (2.98v) I get the formula Temperature = -38.8651*voltage + 165.8181 It is perfectly correct at 50 and 150, but it is as much as 20° out in the region of 110°C, because the actual data is significantly non-linear there. It is no more than 4° out down at the lowest temperatures, but is is seriously shit almost everywhere. I cannot believe that the instruction is to do a 2 point linear fit. I would say the method I used previously would have to be better.
    • When I said "wiring diagram", I meant the car's wiring diagram. You need to understand how and when 12V appears on certain wires/terminals, when 0V is allowed to appear on certain wires/terminals (which is the difference between supply side switching, and earth side switching), for the way that the car is supposed to work without the immobiliser. Then you start looking for those voltages in the appropriate places at the appropriate times (ie, relay terminals, ECU terminals, fuel pump terminals, at different ignition switch positions, and at times such as "immediately after switching to ON" and "say, 5-10s after switching to ON". You will find that you are not getting what you need when and where you need it, and because you understand what you need and when, from working through the wiring diagram, you can then likely work out why you're not getting it. And that will lead you to the mess that has been made of the associated wires around the immobiliser. But seriously, there is no way that we will be able to find or lead you to the fault from here. You will have to do it at the car, because it will be something f**ked up, and there are a near infinite number of ways for it to be f**ked up. The wiring diagram will give you wire colours and pin numbers and so you can do continuity testing and voltage/time probing and start to work out what is right and what is wrong. I can only close my eyes and imagine a rat's nest of wiring under the dash. You can actually see and touch it.
×
×
  • Create New...