Jump to content
SAU Community

Recommended Posts

So,

If I boot it and then stop shortly there after, I get a sulphur smell in the car. Also if I go up a really steep hill on approx 2.5-5psi, so just holding revs while going 110 that same smell creeps into the car.

My cat is only about 6k km old.

I have also tightened up the bolts around the cat.

What else could be causing me this stinky smell?

Link to comment
https://www.sau.com.au/forums/topic/405107-why-do-i-smell-egg/
Share on other sites

It's most likely nothing to worry about mate, most petrols have sulfur in the additives. Some are better/worse smelling than others. Are you filling up from the same petrol station every time, or have you recently filled up at a station you don't normally fill up at?

Ah indeed it is a 100cell cat. stupid cat.

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

My next suggestion was going to be maybe you left some fried rice in the glove box after a night out at Golden Palace so I'm glad it's a 100cell cat.

The fried rice will tend to change smell anyway and I've only had that problem twice before so it's not common in the Skylines

Haha, didnt even think a container of fried rice could fit in the glovebox.

Ah well, the life of running a cat i spose. Decat pipe one day

On the topic of cats, my cars been tuned on no cat, im fitting a 100 cell cat, with a 4 inch body on a 3 inch pipe, will it change the tune much? and for lean or rich? Im getting a retune after just not sure if I should baby it before tune with new cat. Running 338kw on 22 psi. On caltex 98

Any help would be good thanks

Depends on how much it flows, if it is a restriction then it will change the load points. But if it's a well flowing cat then it shouldn't change the tune much at all. I did a back to back test on my car with the exhaust on/off from the front pipe back, made hardly any difference.

Safest to get it checked first, but you shouldn't have to baby it TOO much.

just for sake of conversation my work ute does this too but only sometimes. its an 04 holden rodeo 3.5l v6 and the only unusual thing about this car is that it chews through the oil. i will do an oil change or really top up about every 4 months and only about 500ml will come out. so, maybe the smell might also have something to do with oil consumption.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah and hence my ghetto way of slamming the brakes, get the ABS to cycle, rebleed seems to be a sensible workaround.
    • Hey! Happy to help. Nothing inherently wrong with the adapter, it's more so with Brett Collins himself. He gave me a lot of incorrect information when I was in contact with him and was extremely rude when I challenged him. He stated I could not use any aftermarket twin plate clutches except for his own, not to use the dush shield, bla bla bla and it was all BS.  Collins stated to cut roughly 14mm's off the housing, I took off 15mm to make room for the dust shield. I would confirm with whatever adapter manufacturer you're using. 
    • There's plenty of OEM steering arms that are bolted on. Not in the same fashion/orientation as that one, to be sure, but still. Examples of what I'm thinking of would use holes like the ones that have the downward facing studs on the GTR uprights (down the bottom end, under the driveshaft opening, near the lower balljoint) and bolt a steering arm on using only 2 bolts that would be somewhat similarly in shear as these you're complainig about. I reckon old Holdens did that, and I've never seen a broken one of those.
    • Let's be honest, most of the people designing parts like the above, aren't engineers. Sometimes they come from disciplines that gives them more qualitative feel for design than quantitive, however, plenty of them have just picked up a license to Fusion and started making things. And that's the honest part about the majority of these guys making parts like that, they don't have huge R&D teams and heaps of time or experience working out the numbers on it. Shit, most smaller teams that do have real engineers still roll with "yeah, it should be okay, and does the job, let's make them and just see"...   The smaller guys like KiwiCNC, aren't the likes of Bosch etc with proper engineering procedures, and oversights, and sign off. As such, it's why they can produce a product to market a lot quicker, but it always comes back to, question it all.   I'm still not a fan of that bolt on piece. Why not just machine it all in one go? With the right design it's possible. The only reason I can see is if they want different heights/length for the tie rod to bolt to. And if they have the cncs themselves,they can easily offer that exact feature, and just machine it all in one go. 
    • The roof is wrapped
×
×
  • Create New...