Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

Running in dyno pull at 20psi of boost pressure. Responding nicely

your dyno guy above is a splitting image of my brother - i shared this clip with my mates & we all had a laugh about it!

Enough said.

538773_10151173938879571_454310209_n.jpg

congratulations - 1430nm is absolutely massive!

my rb26/30 made 930nm on a dyno dynamics dyno - would it be accurate to say that your engine makes in the vicinity of 50% more torque? if so, i don't think i could even begin to imagine how this feels...

not bad Martin, i was expecting the turbos to come on later in the rpm

do you feel that power loss below 3800 on the road? does it feel light switch through the midrange?

Edited by domino_z

Domino, it shows to boost slower than it actually does as we needed to use a faster ramp rate on the dyno to keep full traction at all four.

In other words its not that much laggier than stock, with a massive seam of torque once its 'on'

Quite impressed with this combo actually :)

  • 2 weeks later...
  • 2 weeks later...

Saw this car on display on the weekend, looking good, cant wait too see it unleash down the strip! Let me know when its going to be down there Errol....

Cheers Cale

  • 2 months later...

martin, as you know we have been moving and no time to drive this vehicle. have now had the extreme pleasure of driveing about 300 kilometers and the more i drive it the more impressed i am by the whole package that you have put together for us. the torque is awsome to say the least and it comes on incredibely fast and furious. i will run it in properly over the next couple of months before heading to the local drag strip. the amazing thing is that even with this package the vehicle is quite driveable. thanks for all your help in putting this all together.

martin, as you know we have been moving and no time to drive this vehicle. have now had the extreme pleasure of driveing about 300 kilometers and the more i drive it the more impressed i am by the whole package that you have put together for us. the torque is awsome to say the least and it comes on incredibely fast and furious. i will run it in properly over the next couple of months before heading to the local drag strip. the amazing thing is that even with this package the vehicle is quite driveable. thanks for all your help in putting this all together.

Make sure you let us know when it is going to the strip please errol

  • 2 months later...

Sure will Errol. Domino, in short Rooters car is a built Trust 3.8 engine with ported heads equipped with a TD06 turbocharger kit, Syvecs management, and all the fruit to make it run good power on E85 (2000cc injectors etc.) If you want a detailed, detailed list then let me know. Its a nice tight combo, and the TD06 kit is one of our favourites, as not only does it work well, but its engineered for RHD GTRs unlike most anything from the USA (big consideration that one if you dont want to spend extra money fixing steering rack clearance issues) :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Is it alright to top up with just another green coolant?
    • thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...