Jump to content
SAU Community

Recommended Posts

hey guys,

While I love my V35 she's got some sore points that i've just dealt with, but wanted to know if others had the same issue.

Basically I find the headlights in it arent strong enough..

HID yes, thats great, but driving i get what seems like only 6-10m of visibilty out of them if the road is pitch black..

I can jump in my partners mitsub mirage and the headlights on that light everything up like its xmas...

anyone else have this issue ??? I just wanna know if its a common thing, (2003 model / 6spd man) or if its just the lights they come with arent that strong?

are we able to upgrade them without causing mass drama?

--

Also I have no button to increase my dash lights brightness, I know where it is supposed to be, next to the boot release switch..

problem is there is another button there, I will take a photo and post it up, but its a button that has a picture of what looks like windscreen with a squiggle line across it... ???

anyone else have that in their car ? I have no idea what it does when I press it at all... short of pulling the dash apart to trace it :(

thanks everyone

The dash lights are auto.

You can tilt your lights up. There are two "bolts" that you can turn to tilt them up. They are on the back of the lights. Hard to get to but it can be done.

Just wondering, I got 06 coupe, comes with xenon projector/HID if I want to change the bulb to say 6000k 55w can I just buy those HID bulbs say from eBay will it be a straight replacement? Do I need to buy like a separate ballast?

ebay hid kits are generally not interchangeable.

you need to firstly check the bulb type currently fitted (probably D2R) and then order a pair of those in 6000k

but as per usual with ebay - cheaper is cheaper. buy chinese and youll still be squinting

the main thing to work out is why yours are currently poor. its not normal. as said before, get the beam alignment checked. if youre in adelaide i can help

Edited by Deep Dish V35

hey guys,

thanks for the responses, nah I'm in brisbane, thanks for the offer though..

I spent a while tonight going to town on the lights with meguirs plastic cleaner to try see if that would help a bit, they were getting a bit 'grubby', took her for a drive and that seemed to improve it a little bit... not sure if they need to be pointed up much, as driving along road signs light up perfectly fine in the distance, just the light on the ground etc doenst seem "strong"..

I may very well be comparing this to cars like accords etc whose headlights seem to be almost floodlights ..I'd love to compare to some peop in brisbane perhaps, i may very well be expecting more from it than what its gonna give :) hehe

-

as for the mystery button, I thought it may be a windshield demister button as well, that would explain the button...

I know the dash lights are auto, i'm just picky and would like them brigher when the lights actually come on..

if you want bright dash lights, youd have to disconnect the photosensor in the dash, but this will also make the "auto" position on the light switch not work

*edit* i think using the main lights position on the switch makes the dash dim anyway so that kills my idea

Edited by Deep Dish V35

hey guys,

While I love my V35 she's got some sore points that i've just dealt with, but wanted to know if others had the same issue.

Basically I find the headlights in it arent strong enough..

HID yes, thats great, but driving i get what seems like only 6-10m of visibilty out of them if the road is pitch black..

I can jump in my partners mitsub mirage and the headlights on that light everything up like its xmas...

anyone else have this issue ??? I just wanna know if its a common thing, (2003 model / 6spd man) or if its just the lights they come with arent that strong?

are we able to upgrade them without causing mass drama?

--

Also I have no button to increase my dash lights brightness, I know where it is supposed to be, next to the boot release switch..

problem is there is another button there, I will take a photo and post it up, but its a button that has a picture of what looks like windscreen with a squiggle line across it... ???

anyone else have that in their car ? I have no idea what it does when I press it at all... short of pulling the dash apart to trace it :(

thanks everyone

Here is the DIY to headlight adjustment

http://g35driver.com...projectors.html

Don't know if 03 has projector housing? but adjustments should be the same?

Edited by jbenj

*edit* i think using the main lights position on the switch makes the dash dim anyway so that kills my idea

On mine, the dash lights don't dim until it gets dark enough, so if you turn on the headlights in the middle of the day, the dash lights stay at full brightness.

Just wondering, I got 06 coupe, comes with xenon projector/HID if I want to change the bulb to say 6000k 55w can I just buy those HID bulbs say from eBay will it be a straight replacement? Do I need to buy like a separate ballast?

Short answer --- NO!!!

The factory ballast on these cars are 35W, if you want to go to 55W you will need to change the ballast as well.

i was assuming 55w was just his typing error, as all ive ever seen in hid is 35w

do they even make a 55w hid?

as for the auto dimming, just checked on my 2001 sedan, DISCONNECTING the photoeye on the dash WILL stop it going dim

Yeah i've got the same problem with the dash lights mate they go dim once it hits dark, it's a good thing though because you quickly adapt to the brightness whereas if it was blearing at you all night you would get tired a lot quicker.

DISCONNECTING the photoeye on the dash WILL stop it going dim

just saw my typo... it was meant to say:

disconnecting the photoeye WILL NOT stop the dash lights going dim

the system is set to run in dim mode UNLESS there is enough light to operate the the light sensitive switch, which then makes the dash illuminate at full power.... so unplugging the sensor will make the car think it is night all the time

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Mainly being afraid of breaking something on something i've poured so much money into haha
    • Hey   ive gone for a terminated harness on my build so selling brand new unused and unopened piggy back harness  https://www.haltech.com/product/ht-141357-elite-2000-2500-nissan-skyline-r32-33-r34-gt-r/ Located Bathurst NSW   price $600 + postage     
    • The trigger kit I have is similar to the one in the link below. While going through Facebook, I saw someone else mention a similar issue, and I’m starting to think this could be related to the crank gear itself. I understand these parts are CNC machined, but maybe some earlier versions or individual pieces might have slight inconsistencies—it just doesn’t look right in my case. https://www.facebook.com/share/16an8evZd9/?mibextid=wwXIfr I originally installed the crank gear using the thin OEM washer, but as shown in the attached photo, the timing belt walks very close to the edge. When I tried using a Nitto washer—which is thicker—it actually made the issue worse. The belt walks about 1mm off the front edge, which raises more concern about alignment.   I’ve gone through the full process of elimination:   The tensioner pulley and bolt are brand new and installed correctly. The bolt isn’t bent and is oriented properly. The back of the tensioner and the idler pulley are clean and seated correctly. The idler sits slightly more forward, which I understand is due to its design. I’ve experimented with both tight and loose belt tension, but it makes no difference. As soon as the engine runs, the belt immediately walks forward again—even if I reset it beforehand.     At this point, I’m considering replacing the crank gear with your Race Version 1 (12-tooth), but before purchasing, I wanted to ask:   Are you aware of any alignment issues when using this gear? Would this gear help keep the belt aligned correctly, or could the walking still occur? Does it work with a standard missing-tooth crank and rear washer? Is there any specific crank setup or install procedure required?     For reference, I’m not using a front washer, as the PRP crank gear seems to replace the need for one.   Looking forward to your advice.
    • Yep, looks that way. Never driven an E30 or R31 so I can only imagine  
×
×
  • Create New...