Jump to content
SAU Community

Recommended Posts

Also, going to Chasers Motorworks on Monday. Ordering in a Nistune board and also booking in my 90k km service with them.

All up, including service, supply of board and tune should cost me $1100. Hopefully they'll look after me... Cant wait to see the difference after a tune!

Chasers seems alright, a lot of nice show/ race cars are always in there. My old office in the same strip. Good bunch of guys but that was 3 years ago.

  • Replies 47
  • Created
  • Last Reply

Top Posters In This Topic

Also, going to Chasers Motorworks on Monday. Ordering in a Nistune board and also booking in my 90k km service with them.

All up, including service, supply of board and tune should cost me $1100. Hopefully they'll look after me... Cant wait to see the difference after a tune!

Let us know how you go with Chasers and the work they do. I would be most interested.

  • 2 weeks later...

That looks like a nice car. Very rare combo of black, factory RS4s manual and sunroofs. These cars don't come up very often in that factory spec.

thanks mate :) i'm looking at possibly a new front end though... just have nfi what to look for at the moment!!

i wish my rs4s was black :(

I love black, but its a bitch to keep clean!!

Also, looking at a front grill...

These guys alright? Or pain in the arse with shipping and customs??

http://www.nengun.co...t-grille-267702

That won't fit your car as it is for a series one and you've got a series two. Check out Import Monster, I got my NA grill (pretty much the same as the one in your link) through them for about $180, and it only took about a week to get from Japan to Tassie. One like this:

http://www.importmonster.com.au/view?url=http://page21.auctions.yahoo.co.jp/jp/auction/j193572331&thumb=http://auctions.c.yimg.jp/f46batchimg.auctions.yahoo.co.jp/users/0/2/3/2/yuasazidousya2-thumb-1344565546952230.jpg&title=5268

That won't fit your car as it is for a series one and you've got a series two. Check out Import Monster, I got my NA grill (pretty much the same as the one in your link) through them for about $180, and it only took about a week to get from Japan to Tassie. One like this:

http://www.importmon....jpg&title=5268

Thanks mate. That should fit straight into my S2? Or do you need to modify it further to fit it?

Thanks mate. That should fit straight into my S2? Or do you need to modify it further to fit it?

That should fit straight on as far as I know. Series 2 grills have the holes for the fog lights, series 1 grills don't. Apart from that they are pretty standard as far as I am aware. Mine just fitted straight on when I got it.

That should fit straight on as far as I know. Series 2 grills have the holes for the fog lights, series 1 grills don't. Apart from that they are pretty standard as far as I am aware. Mine just fitted straight on when I got it.

Ah ok cool..

Now I dunno which will look better on my black C34...

600x450-2012042300013.jpg

nengun-200696-00-nissan-stagea_c34_genuine_late_grill.jpg

Dont really want to buy both for the sake of seeing which looks nicer haha

Seeing as I'm located in Deer Park and fairly close to you, happy to let you take mine off and trial fit it on yours to make up your mind. :thumbsup:

Mine is the second grill and painted black but it now is a bit flakey, suppose it'll still give you an idea how it'll look.

That won't fit your car as it is for a series one and you've got a series two. Check out Import Monster, I got my NA grill (pretty much the same as the one in your link) through them for about $180, and it only took about a week to get from Japan to Tassie. One like this:

http://www.importmon....jpg&title=5268

looks like the auction is finished.. can I still buy it?? this is the one i want now!

Ah ok cool..

Now I dunno which will look better on my black C34...

nengun-200696-00-nissan-stagea_c34_genuine_late_grill.jpg

Dont really want to buy both for the sake of seeing which looks nicer haha

I have the second one on my white car, but it has been painted black with the badges unclipped, so no chrome.

I'm happy with it on a white background, might be too much black for a black car.

I have the second one on my white car, but it has been painted black with the badges unclipped, so no chrome.

I'm happy with it on a white background, might be too much black for a black car.

yeah my heart is set on the other grill, but now i cant find one haha

nice ride dude :) basically Identical to mine, apart from the kit.. I got a dolphin kit on mine.. bit curvy-er

why are you going for a grill ?? just get the silver mesh, looks sweet ... *exhibit A*

intercooler.jpg

nice ride dude :) basically Identical to mine, apart from the kit.. I got a dolphin kit on mine.. bit curvy-er

why are you going for a grill ?? just get the silver mesh, looks sweet ... *exhibit A*

intercooler.jpg

thats a sweet front end~!!

any issues with having your cooler exposed with the cops??

also, did you get your mesh at autobarn or somewhere similar??

thats a sweet front end~!!

any issues with having your cooler exposed with the cops??

also, did you get your mesh at autobarn or somewhere similar??

It came like that imported, but I did notice you can get similar mesh at all the auto (and hardware?) stores :)

never had a problem at all, had the car well over two years now, and not a single problem from the po-po

(considering I've got a carbon fibre hood, bov, fmic, pod, no cat and 3' turbo back... :D)

they prob like... hmmmm volvo... nice volvo... now where's the skyline that has that bov.. *turns head*

I vote get the mesh and see what you think dude .. I think it looks way better than any of the stock grills.

Edited by atomaly

If you are not too sure better to spend less cash and get it looking a little nicer while you make up your mind.

Although most member seem to have stock grills so I'd keep yours

Heres the front of mine with the series two grill if you want to know exactly what yours would look like

12080037.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Dear folks My family members have 4 different cars : Triton 2015 and Corolla 2011 and Mazda3 2012 and Hyundai Elantra 2014 Looking to buy engine oil funnel spill free What I found are are below  https://www.amazon.com/gp/aw/d/B0BBTTJNKX?ref=ppx_pt2_mob_b_prod_image&th=1 https://www.ebay.com.au/itm/145553221359?srsltid=AfmBOoqYBU6Ptw0LU_bAp_k67U3qkF97HHvePkA7iHZw8vUmiwoIRaRr https://www.amazon.com/gp/product/B09X23TCS5?th=1 Is there a funnel with attachment that fits most cars ? Don't mind to spend for a decent quality  Thx  
    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
×
×
  • Create New...