Jump to content
SAU Community

Recommended Posts

Hey guys, I've searched here, google and eBay looking for the black pipe/hose going from one cam cover to the other on an R34 RB25det. Happy to buy even a universal silicon hose piece but seem to find that either. Guess I'll try a bit harder but in the mean time does anyone have a source for these? Would heater hose be ok for now? (mines gone rockhard and split really bad)

Any hose store?? Theoretically heater hose 'should' be ok, as it's mostly air with just a bit of vapour. But really you should get some proper oil control hose. I get mine from Hoseco. Otherwise Enzed, Pirtek, etc. etc.

Just go in and ask for 5/8 oil control hose.

heater hose wont work as the vapours going out of the rocker covers are hot and the hose will crap itself, as the hose is shaped your best bet is to get one from nissan,or you COULD get one from hoseco but you may have to buy a metre of it unless they have some leftover off cuts

heater hose wont work as the vapours going out of the rocker covers are hot and the hose will crap itself, as the hose is shaped your best bet is to get one from nissan,or you COULD get one from hoseco but you may have to buy a metre of it unless they have some leftover off cuts

Heater hose will work as a temporary solution is what I meant.

You don't need to use the formed hose, you can rotate the breather to suit any hose. No point paying out the ass for pre-shaped hose. You can also buy half meters from Hoseco. At $18 a meter it's not too bad.

Edited by Hanaldo

So is Siicon hose suitable for this? I can get the piece i need from Nizzbits for $35 delivered so I can use silicon and get it for 18 a meter like u said. Although I do like fitting genuine parts where I can.

go the genuine part if you can, the hose you can get from hoseco may or may not posses the heat resistance that you need. . .as a GUIDE i paid $18 for a breather (from rocker cover to rocker cover) hose for a R32 RB20DET from NISSAN. . .yes you can use heater hose as a very temp repair but why not fix it properly the first time?

It says it's for a RB20DET but those cam breather hoses look the same to me as RB25DET's as well (confirm the part # to be sure). http://www.kudosmotorsports.com/catalog/nissan-hose-blowby-genuine-nissan-skyline-r32-gtst-rb20det-p-581.html

whats wrong with heater hose? ive had it on my 34 for about 4 months now since i noticed the old one had split and i cant say ive seen any ill affects at all, ive taken it on and off half a dozen times since then as well, never had any troubles or noticed any wear or anything.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...