Jump to content
SAU Community

N/a Skyline Question

Nibibo

By Nibibo,
in Engines & Forced Induction

 Share

Recommended Posts

mad082 Grand Master

mad082

Posted
Posted

So I've been told that Supra's drink petrol like its water.

Well I can give you the exact answer your looking for.

I get a good 425KM running on a full tank of Premium 98 before the empty light comes on. I believe it could do at least 450KM before I start running on fumes, but I tend not to risk it, although I do plan to run completely dry until my 34 becomes dehydrated to the point the engine shuts off just to see the MAXIMUM it can do on a full tank.

Gotta get myself a Jerry can first.

But to answer your question, 425KM on full tank of 98. Auto R34 25GT with RB25DE, no mods. Costs me about $140 a week though to run, since it's my daily and I drive it to city and back most days.

you should have roughly 10L of fuel left in the tank once the light comes on. in the case of my commodore though, i drove from gympie to noosa (just over 60kms) with the light on and then filled up to find i still had about 10L left in the tank. in the pulsar though, the light comes on fully with about 8L to go, but starts coming on then going off at about 11L to go.

back on topic though, if you want something RWD with better fuel economy than a skyline or supra, then get a silvia. the SR20 is a more fuel effecient motor.

Vera Community Regular

Vera

Posted
Posted

Don't know if your being sarcastic or not :unsure:

But if legit question, you don't have a fuel warning light on your cluster?

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

aussietroy Proficient

aussietroy

Posted
Posted

mines an auto n/a and i get around 400-450kms out of a tank of 95 mixed highway and town, good weeks i can push 500 before running on fumes, mostly highway .... but if you put your foot down it can easily only do 300-350 flogged around town ....

xntrq Veteran

xntrq

Posted
Posted

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

My 34 is NA. maybe a pre-R34 thing? or perhaps your LED blew out.

mad082 Grand Master

mad082

Posted
Posted

not being sarcastic, looking back now the post does sound very dumb.

I actually dont have one, looked real hard at the dash too. I managed to run my tank almost empty to see if anything lights up.

I've heard of other skylines being like this, but im not concerned with it so never bothered looking it up.

I was under the idea that the na models, being the cheaper ones, nissan might have skipped over that.

they certainly have one. all modern cars do. there would probably be some sort of regulation that requires it.

it may be that the bulb is blown or the sensor in the tank is faulty.

i'm trying to remember where it is in the r33. i have a feeling it may be in the same cirlce as the fuel gauge, rather than being a seperate light like the handbrake light, etc. but if someone has a cluster handy, they could just remove the bulbs at the back and shine a torch through and you would see what each bulb does when you look at it from the front

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • V35Newbie
      After market rear camber arm adjustment

      By V35Newbie · Posted

      I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • Duncan
      After market rear camber arm adjustment

      By Duncan · Posted

      You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
×
×
  • Create New...