Jump to content
SAU Community

Recommended Posts

Ok so I've got a heap of R33 parts, I'll try to make the list as comprehensive as I can, but if you're after something thats not on the list feel free to msg me as I may have it. All parts located in western suburbs of Melb, happy to post anything under 15kg. Prices are cheap!

Can msg pics of anything.

0424999936

S2 Bonnet (white, straight) - 100

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

Instrument cluster (manual turbo 130ks) - 80

Drivers seat (bolster rip) - 20

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

Injector loom - 20

Coil pack loom S2 - 20

Rear cradle - 80

Diff - 80

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - 100

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - 20

Brake master cylinder (abs) - 40

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers - 180

Rear 5 stud setup (no handbrake cables) - 220

Link to comment
https://www.sau.com.au/forums/topic/406570-soooo-many-33-parts-vic/
Share on other sites

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

sold most of the after market stuff off it. had greddy plenum nismo 555cc 2871r and te37s but it's all sold now. still got a really neat fmic with mounting kit for 100 bucks

yeah piping was to suit forward facing plenum unfortunately :(

everyone keep the pm, messages and calls coming! will update the list when things get picked up or sent out today

Updated list!!

S2 Bonnet (white, straight) - 100

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

Instrument cluster (manual turbo 130ks) - 80

Drivers seat (bolster rip) - SOLD

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle - 80

Diff - SOLD

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Updated list!!

S2 Bonnet (white, straight) - SOLD

RHF guard (white, straight) - 70

Castor rod LHF - 40

Lower control arm RHF - 60

Castor rod brackets - 20 each

S2 AFM air flow meter pink label - 60

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Dash - 20

Power steering rack (recod complete from tie rod end to end) - 80

Interior parts - just ask, have heaps

Front subframe with engine mounts - 50

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket - 40

Manual tailshaft - 60

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle - 80

Diff - SOLD

Rear swaybar with links - 20

rb25 clutch fan with sr20 fan blade - 10

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan - 10

Standard dump pipe with O2 sensor - 20

Radiator with hoses - 40

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals - 40

Clutch master cylinder - 40

Clutch metal hard lines - 20

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete - 20

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts - 30 each

Drivers door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Edited by filipovic

Updated list!! 19.8.2012

S2 Bonnet (white, straight) - SOLD

S2 Bonnet (white, perfect condition) - 150

RHF guard (white, straight) - 40

RHF guard (white, straight, holes drilled for cable ties) - 20

LHF guard (white, straight, holes drilled for cable ties) - 20

Grille (s2 white excellent condition) - 30

Despoilered boot (white, no holes, excellent condition) - 100

LH Taillight (white) - 40

RH Tailight (white) - 40

Spoiler (s2 in silver) - 50

RB25det s2 engine (complete with loom, ecu, turbo etc 100% complete, very low KM) - 1500

RB25det manual gearbox (very low KM) - 1300

Heater core - 40

Manual tailshaft x2 - 50 each

Front upper control arms - 10 each

Castor rod LHF x2 - 40

Castor rod RHF - 40

Lower control arm LHF - 60

Lower control arm RHF x2 - 60 each

Castor rod brackets x4 - 20 each

S2 AFM air flow meter pink label x2 - 50

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Drivers seat (great condition) - 50

Passenger seat (great condition) - 40

Rear seats (great condition s2) - 60

Dash x2 - 20 each

Dash facia (good condition) - 40

Centre console x2 - 20 each

Gear surround (manual, boot in bad condition) - 20

Steering column lower trim - 20

Glovebox x2 - 20

Seatbelts - 15 each

Sunroof switch - 10

Interior map light - 20

Sunvisors - 10 each

Parcel shelf - 20

Power steering rack (recod complete from tie rod end to end) - 80

Power steering rack (tie rod end to tie rod end) - 50

Interior parts - just ask, have heaps

Front subframe with engine mounts x2 - 50 each

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket x2 - 40 each

Manual tailshaft x2 - 60 each

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle x2 - 60

Diff (lsd manual ratio) - 120

Diff - SOLD

Rear swaybar with links x2 - 20

rb25 clutch fan with sr20 fan blade - 10

rb25 clutch fan (trimmed for cooler piping) - 40

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan x2 - 10

Standard dump pipe with O2 sensor - 20

Dump pipe with screamer and O2 sensor - 150

Radiator with hoses x2 - 40each

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals x2 - 40 each set

Clutch master cylinder x2 - 40 each

Clutch metal hard lines x2 - 20 each set

Brake Booster - 40

Brake master cylinder (non abs) - 60

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete x2 - 20 each

Drivers door trim (without window switch) - 30

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts x6 - 30 each

Drivers door (white) - 20

Passenger door (white) - 20

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - 60

Rear 5 stud setup (no handbrake cables) - SOLD

Updated list!! 25.8.2012

S2 Bonnet (white, straight) - SOLD

S2 Bonnet (white, perfect condition) - 150

RHF guard (white, straight) - 40

RHF guard (white, straight, holes drilled for cable ties) - SOLD

LHF guard (white, straight, holes drilled for cable ties) - SOLD

Grille (s2 white excellent condition) - 30

Headlight (s2 RHF missing the bracket where the grille clips) - 40

Headlight (s2 LHF broken on the bottom about 20c piece size missing) - 20

Despoilered boot (white, no holes, excellent condition) - 100

Front shocks (standard but great condition complete with springs) - 30 each

Coilovers (rear, pedders sports rider extreme x) - 300

350z wheels (pair of 17's no gutter rash) - 250

Steering wheel (s2 excellent condition) - 60

Steering wheel (rwc condition) - 20

Airbag (s2 excellent condition) x 2 - 20 each

Indiator stalk - 10

Wiper stalk - 10

Clock spring - 10

Airbag control unit - 10

Strut brace (front) - 50

Strut brace (rear) - 60

Wiper motor - 20

Steering column - 10

LH Taillight (white) - 20

RH Tailight (white) - 20

Spoiler (s2 in silver) - 50

RB25det s2 engine (complete with loom, ecu, turbo etc 100% complete, very low KM) - SOLD

RB25det manual gearbox (very low KM) - 1300

Heater core - 40

Manual tailshaft x2 - 50 each

Front upper control arms - 10 each

Castor rod LHF x2 - 40

Castor rod RHF - 40

Lower control arm LHF - 60

Lower control arm RHF x2 - 60 each

Castor rod brackets x4 - 20 each

S2 AFM air flow meter pink label x2 - 50

Instrument cluster (manual turbo 130ks) - SOLD

Drivers seat (bolster rip) - SOLD

Drivers seat (great condition) - 50

Passenger seat (great condition) - 40

Rear seats (great condition s2) - 60

Dash x2 - 20 each

Dash facia (good condition) - 40

Centre console x2 - 20 each

Gear surround - 20

Steering column lower trim - 20

Glovebox x2 - 20

Seatbelts - 15 each

Sunroof switch - 10

Interior map light - 20

Sunvisors - 10 each

Parcel shelf - 20

Power steering rack (recod complete from tie rod end to end) - 80

Power steering rack (tie rod end to tie rod end) - 50

Interior parts - just ask, have heaps

Btrims - ask for price

Front subframe with engine mounts x2 - 40 each

3 inch catback with single cannon 100db - 150

Gearbox mount with bracket x2 - 30 each

Manual tailshaft x2 - 50 each

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - 700

5 stud conversion (100% complete hubs discs calipers brackets pads handbrake lever and cables) - SOLD

Injector loom - SOLD

Coil pack loom S2 - SOLD

Rear cradle x2 - 40 each

Diff (lsd manual ratio) - 120

Diff - SOLD

Rear swaybar with links x2 - 20

rb25 clutch fan with sr20 fan blade - 10

rb25 clutch fan (trimmed for cooler piping) - SOLD

Front window glass, drivers and passengers - 10 each

Radiator/condensor fan x2 - 10

Standard dump pipe with O2 sensor - 20

Dump pipe with screamer and O2 sensor - 150

Radiator with hoses x2 - 30each

FMIC with mounting bracket that replaces front reo, no piping - SOLD

Manual conversion parts

Pedals x2 - 40 each set

Clutch master cylinder x2 - 40 each

Clutch metal hard lines x2 - 20 each set

Brake Booster - 30

Brake master cylinder (non abs) - 50

Brake booster - SOLD

Brake master cylinder (abs) - SOLD

Drivers window reg with motor - 70

Passenger window reg with motor - 40

Passenger door trim complete x2 - 20 each

Drivers door trim (without window switch) - 30

Rear lower control arms - 20 each

Rear upper control arms - 20 each

Half shafts x6 - 30 each

Drivers door (white) - 20

Passenger door complete with glass and motor/reg (white) - 80

Front 5 stud turbo brake calipers (missing a seal,caliper slide, and a couple of caliper bolts) - SOLD

Rear 5 stud setup (no handbrake cables) - SOLD

Hi mate, i'll grab: rb25 clutch fan with sr20 fan blade - 10

Providing the clutch hub is tight and in working order, and you'll post. (I only really need the viscous hub, don't mind if you send it without the blades).

Cheers.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...