Jump to content
SAU Community

Recommended Posts

Hey guys

Does anyone know of or have used any anti-condensation products? Or if they exist?

I'm really sick of getting condensation on my car every morning and driving half blind until my glass warms up/evaporates.

Link to comment
https://www.sau.com.au/forums/topic/406820-anti-condensation-for-windscreens/
Share on other sites

Rainex antifog but in my past its only good on house mirrors lol

Turn on ac and place airflow in recurculated it will dry them fast as hell

Outside rain ex works in mutiple thin layers or glass wax

R34 came with a anti condensation coating factory on side glass ( which is why its a bugger to clean off acid rain lol) i found it on the sales brochure along with two paints same code one hard , one normal ??

Edited by Carbon 34
i found it on the sales brochure along with two paints same code one hard , one normal ??

If you're lucky enough to have the Super Fine Hard Coat, you should also have a cool SFHC sticker on your rear window.

img4328closer1024x683.jpg

Edited by iwanta34gtr

Not anymore lol the osaka acid rain etched it so bad the dealer used a steel wool pad to try and rid the car of etched glass , which i had to polish out the fine scratches on the rear window :-(

The paint is the super hard as well and after 3 runs of m105 cutiting compound shines like glass again

#1 way to stop fogging up.... keep the inside clean!!! i have no issues with fogging because i clean the inside regularly. It's only if it's really cold and i'm really hot, that it will fog a little. Generally not a common combo...

All the time you're building up oils on the inside glass, windows down driving will speed this up especially...

IMO you don't want to recycle air mode to clear fog. If it starts fogging, and you have recycle air on it's taking the warm air your expelling and circulating that around the car with a cool exterior = fog. I guarantee without A/C, recycle mode will speed up the fogging.

As for A/C, yes it does clear fog very quickly but then it comes back just as quick and generally if you have fog issues the last thing you want is to blast the A/C hahaha.

I go the complete opposite if need be, i crank the heater (which i'd be wanting to do anyway). It doesn't go away as quick but i find it KEEPS it away, plus you're not needing to run the A/C and all the drawbacks that come with that. I find the heating method finds the balance of temperature better to stop the fogging coming back...

But i always have it on fresh air mode, not recycle.

If you haven't cleaned your interior glass for a while it will be FILTHY, if it is even SLIGHTLY smeary, your fog problems are hugely amplified.

Some people will see this as a bit OTT, but this is what i do and fogging for me is VERY rarely an issue...

Get a MF, warm water and dampen the MF. Clean the glass down whilst constantly rinsing the MF. You'll see the water getting dirty.

Do that a couple times until the water is clean.

Get another clean MF and wipe the glass dry.

Now, the last step is to really cut through whatever grime is left (warm water won't do it alone). Get a good glass cleaner like Stoners Invisible Glass and get a Glass MF. Glass specific MF's are very different to paintwork MF"s, but work great (and you'll definitely see them get dirty too). Go over glass with Stoners and glass MF.

Finally, wipe down with another clean MF and from here you will not need any sort of 'product' on the interior glass.

FI's Glass MF system

http://shop.finalins...products_id/210

Final Inspection's glass cleaner isn't out yet, but Waxit sells Stoners

http://www.waxit.com...id=213&Itemid=1

Lastly, DO NOT use your chamois or waffle weave drying towel to clean your interior glass AFTER you've washed the car. That's a sure fire way to make them super grimey. You have to have the cleanest possible MF to use on interior glass, anything else and you're just making the problem worse.

Without ac vent mode and crack the window tops a bit

With a/c you want recycle mode because it runs the air inside the car thru to dry the air , i grew up in wet snow conditions and over 35 years thats how you cleared windows the fastest , if you open the outside air it brings in damp air and takes longer to clear since the humidity is still high , go buy a 2 dollar humidity gauge and watch it both ways

Yes clean windows free of the dash cleaner haze and smokers yuk or even dust , will make the windows clear faster , do not put air on the floor when your trying to clear them wait till your good and dry or it will fog up big time with wet floormats

tint seems to clear faster then glass as well but i would say its the temp difference it acts as insulation a tad

Edited by Carbon 34

Anyone wanting to clean glass, use Newspaper instead on other things,

No streaks ever and 100% cheaper :)

Dont do it !!! In the navy bootcamp we used newspaper and vineger the glass was scratched bad from it !!! It does work but not safe over time

The glass looked like a bad detail job buffer fine scratches

Edited by Carbon 34

go buy a roll of home brand paper towel from Coles or woollies. don't be a tight ass on the paper towel when cleaning, i use about 10 sheets per window or per half the front window.

newspaper has never worked for me and is best to clean the BBQ with :)

go buy a roll of home brand paper towel from Coles or woollies. don't be a tight ass on the paper towel when cleaning, i use about 10 sheets per window or per half the front window.

newspaper has never worked for me and is best to clean the BBQ with :)

Vinegar(white) works great on glass ( not tint) it takes off water spots and not harmful to most things , pop into spray bottle and mist it on the smell actually can kill other odors , you can use it on a zillion things if you find the guidebook for it online

Home brand towels are even worse , like friggan sandpaper

Use a proper soft microfiber towel ( only use it on glass and do not wash in fabric softener ) if you do it streaks like hell on paint or glass

It works a treat on grils , sprinkle on baking soda after misting on and watch the foaming drop off the grease , actually in the navy lime cordial is used on grease go figure ?

Edited by Carbon 34

I'm not even in the car when theres condensation!

By the way guys this is the outside. I think many of you guys are thinking it's fogging up on the inside. Condensation is different from fog. For the inside, there's Rain X Anti-Fog :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
    • My return flow is custom and puts the return behind the reo, instead of at the bottom. All my core is in the air flow, rather than losing some of it up behind the reo. I realise that the core really acts more as a spiky heatsink than as a constant rate heat exchanger, and that therefore size is important.... but mine fits everything I needed and wanted without having to cut anything, and that's worth something too. And there won't be a hot patch of core up behind the reo after every hit, releasing heat back into the intake air.
    • There is a really fun solution to this problem, buy a Haltech (or ECU of your choice) and put the MAF in the bin.  I'm assuming your going to want more power in future, so you'll need to get the ECU at some stage. I'd put the new MAF money towards the new ECU. 
×
×
  • Create New...