Jump to content
SAU Community

Recommended Posts

Clearout time again. All items in Brisbane, can post, pickup, or maybe deliver if you're not too far.

Stainless split dump pipe and mild steel 3in front pipe with o2 sensor bung. Good cond, all welds intact. Good n cheap at $60

post-78602-0-80994000-1345017455_thumb.jpg

6x stock r33 gtst 370cc injectors. Bought them off a member here a while back with the intention of getting them cleaned so I could just do a swap with mine one weekend, but ended up having the car off the road for a while and got mine done so never used these. $60 the lot

post-78602-0-05531200-1345017678_thumb.jpg

Brand new adjustable cam gear. Got a set of 2 off ebay but only used 1. This is the good kind with the outer steel gear not aluminium. proven (on both of my cars) to give noticeably quicker spool and no loss of power or driveability. $45 - never used.

post-78602-0-04064300-1345017869_thumb.jpg

R34 series 3 Garrett metal not nylon compressor wheel, ceramic rear, OP6 turbine housing turbo. $300

post-78602-0-73929600-1345018052_thumb.jpgpost-78602-0-89926300-1345018192_thumb.jpg

R33 series 2 stock turbo, no shaft play, comp and turbine intact, but bearing blown or flatspotted, shaft still spins but clicks, needs rebuild. Good to send in as exchange so you can still drive around in meantime. $60 for you my friend.

post-78602-0-76204600-1345018178_thumb.jpg

R34 side mount intercooler, good as the day it came out of the factory but with the normal scrapes etc of being on a car since it did come out of the factory. In other words, still in good nic with no real damage. $70. No pics as it's in my other garage but can send a pic if needed.

R33 side mount intercooler, vgc. $20. Same deal, in other garage at moment but can get pics if needed.

if you where in melbourne id be all over that dump/front pipe and cam gear.

prob take that op6 for my 33' if i had 300 bucks too.

i assuming by the look of the cam gear its universal for exhaust and inlet? i'm after an exhaust cam gear, if it suits rb25 s2 exhaust cam i'll take it.
...definitely suits this, as that's what my car is too, and I put mine on exhaust cam.
if you where in melbourne id be all over that dump/front pipe and cam gear.
I have alot of faith in Australia Post my friend :). Let's make this deal happen.

lets have a laugh, i need one, my job is boring as hell today. what the postage worth on that dumper then?

I have alot of faith in Australia Post my friend :). Let's make this deal happen.

you must be the only guy in the world that does! :rant:

well, maybe....only $$$ paid closes the deal for me. Had someone else ask about that too, should be no more than $30 boxed and posted but will find out exat costs on Mon if y'all want to pm me your postcodes so I can get some prices n whatnot.

Have I gone mad? Quite possibly...but crazy low prices have arrived

injectors $40 the set, $50 for the r33 turbo, $200 for the r34 turbo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...