Jump to content
SAU Community

Recommended Posts

For sale is a non-running early 1997, series II BCNR33 GT-R V-Spec.

Perfect for a mechanic or for somebody willing to start a new project.

Engine suffered a failure in the #1 cylinder, causing block damage and also #1 turbo damage - I am not sure what it will need to get it running, but it would have to be a full rebuilt or a 2nd hand motor.

I bought this car 18 months ago when it had 102,000. Took great care of it, but unfortunately .........shit happens.

Body is perfect - this car's chassis is in a great condition, just needs a motor :whistling:

Chassis has travelled 118,000kms.

Wheels are standard 17x9 +30 with 3,000km old Dunlop Direzza's Z1 Star Spec tyres.

Stereo is Pioneer MVH8300BT.

Speakers are Pioneers 6.5" TS-A1604C splits

Interior is perfect. Comes with R34 V-Spec II pedals.

Gearbox is in a perfect condition - recently serviced with Motul oils.

Diff has also been serviced with Motul oils. Fluids in transfer case have also been changed.

Brakes are standard Brembo's with Ferodo DS2500 pads that have recently been serviced with RBF 600 fluids.

I'd love to be able to spend time and money and get this great car running again but I'm just not in the position to do that so here it is.

Location: Melbourne

Price: $13,000.

post-62747-0-25117600-1345120362_thumb.jpg

post-62747-0-12525500-1345120410_thumb.jpg

post-62747-0-73750000-1345120453_thumb.jpg

post-62747-0-10092400-1345120504_thumb.jpg

post-62747-0-04346000-1345120584_thumb.jpg

post-62747-0-45583500-1345120619_thumb.jpg

post-62747-0-27952700-1345120633_thumb.jpg

post-62747-0-13204500-1345120665_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/407182-1997-r33-gt-r-v-spec-non-running/
Share on other sites

Ok thanks.

Problem is I live in Mackay north QLD, I'd have to get it trucked.

I'll see what my options are and let you know. Very interested though.

Edited by The Mafia

Lot of interest, lot of interest, and people have been asking me for more pics - so here is one of the interior, one of the broken engine (with piping and the radiator removed) and one of the underside.

Please understand that car is being sold completely stock.

post-62747-0-46335900-1345197114_thumb.jpg

post-62747-0-62443400-1345197133_thumb.jpg

post-62747-0-39957000-1345197162_thumb.jpg

Car back on sale - buyer unable to sort finances....

If you are after immaculate, stock BCNR33 that needs an engine then this is the one for you - price $12,500

Do you have auction papers from Japan specifying vehicle grade etc?

Interested but has this had the left front quarter panel replaced or repainted? Only reason I ask is because colour is different in this pic

http://www.skylinesaustralia.com/forums/index.php?app=core&module=attach&section=attach&attach_rel_module=post&attach_id=399893

dont know if we can or should be asking that....

But one thing I am interested in knowing....what is the approximate cost of the options the new buyer for such a car has, in other words;

a. cost of finding a used RB26 sitting around, and swapping this in - factoring in all costs including money made from the dead block and

b. cost of simply re-building the RB26 already in it - from the ground up

Am I right in guessing about $6K the first option, and $10K the second option?

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...