Rb25 Powered Gq, Head Removal?

[The Dan]

Rb26 gasket. Block off VCT gallery at the front, bolt the head down, skids

You can tap into the front of the gallery to retain the VCT if you want but that will cost more money

[The Dan]

The RB30 actually came out in the patrol didn't it?

If so, you can remove your current blue plate haha

[zac320]

Yes very true it did! But the vehicle was last registered with a rd28 which is the original motor.

Yes ive read up abit on VCT? Not needed you reckon? Because that makes things simpler again. Because then I won't have to tap into the oil sender ect.

You've been very helpful! Thankyou

[zac320]

If I dont want vct do I just weld or grub screw the oil gallery in the head and don't worry about tapping into the pressure sender? Also if I block off the vct i don't need to add oil restrictors to the head?

Sorry about all the questions im trying to read up and search things as much as possible, I've got the head and block at home so I'm gonna start getting it prepared

Edited August 23, 2012 by zac320

[The Dan]

Yes very true it did! But the vehicle was last registered with a rd28 which is the original motor.

Yes ive read up abit on VCT? Not needed you reckon? Because that makes things simpler again. Because then I won't have to tap into the oil sender ect.

You've been very helpful! Thankyou

Quite the opposite. I kill people to get VCT. You want it

[kitto]

VCT is goooood!

[steve200b]

you will need to comply with emissions to get a Rb30det engineered into a patrol, that will be real hard with a nistune ecu unless you are on e85

[zac320]

I thought i wouldnt need to get it engineered because patrols come with rb30s? Only thing is the car useto be a rd28 diesel.

[steve200b]

any version of a turbo petrol will require an engineers report and any version of a rb30det will require an emissions report.

[zac320]

I'm in Vic if the laws are different to other states? Anyway Im buying a new nearly complete engine. The heads a series 2 and I'm just wondering will my s1 coils fit? I have the igniter and everything else just wondering as they are brand new OEM ones.