Jump to content
SAU Community

Recommended Posts

2013 GPC Vic States

WOMEN

48kg class
1. Melissa Knight - 47.7kg - 85/47.5/110 - 242.5kg

60kg class
1. Rebecca Gleich - 57.8kg - 120/67.5/150 - 337.5kg
2. Sussy Kollen - 57.8kg -110/72.5/120 - 302.5kg
3. Vicki Jewson - 57.7kg - 90/57.5/130 - 277.5kg

67.5kg class
1. Heidi Stewart - 60.6kg - 110/70/150 - 330kg
2. Megan Reily - 65.4kg - 100/BMB/130 - BMB

75kg class
1. Jay Jama - 71.0kg - 60/30/95 - 185kg

82.5kg class
1. Emma Bortolotto - 81.9kg - 130/67.5/140 - 337.5kg

MEN

56kg class
1. Marlon John - 54.8kg - 115/80/120 - 315kg

67.5kg class
1. Jesse Markopoulos - 66.8kg - 160/100/190 - 450kg
2. Luke Bender - 66.0kg - 110/100/200 - 410kg

75kg class
1. Emad Nayef - 74.7kg - 235/115/255 - 605kg
2. Robbie Tissera - 73.1kg - 227.5/120/220 - 567.5kg
3. Ivan Ho - 70.7kg - 165/120/170 - 455kg
4. Dim Papaconstantinou - 70.5kg - 145/100/185 - 430kg
5. Daniel Distefano -69.5kg - 125/100/160 - 385kg

82.5kg class
1. Martin Nguyen - 80.9kg - 252.5/157.5/275 - 685kg
2. Eddie Dargham - 81.2kg - 185/105/250 - 540kg
3.Chris Van Gunst - 78.3kg - 150/125/235 - 510kg
4. Jordan Zollo - 82.4kg - 150/130/200 - 480kg
5. Sam Boyce - 81.3kg - 140/112.5/185 - 437.5kg
6. Dimitri Jayaratne - 76.7kg - 135/57.5/175 - 367.5kg
7. Adrian Zwaan - 81.9kg - 95/80/160 - 335kg
8. Krit Barnett - 82.0kg - 130/105/65 - 300kg

90kg class
1. Max Markopoulos - 89.8kg - 260/155/250 - 665kg
2. Adam Lam - 89.3kg - 240/140/260 - 640kg
3. Erros Chiodo - 88.0kg - 215/125/275 - 615kg
4. Nick Edlin - 88.8kg - 210/132.5/240 - 582.5kg
5. Keng Tan - 89.7kg - 215/142.5/220 - 577.5kg
6. Conor Zyskowski - 87.0kg - 230/110/230 - 570kg
7. Stelian Tchapkanski - 89.9kg - 180/150/215 - 545kg
8. Ethan Perera - 87.3kg - 130/80/150 - 360kg

100kg class
1. James Jenai - 94.5kg - 245/175/250 - 670kg (180kg 4th BP)
2. James Visciglio - 97.9kg - 195/135/272.5 - 602.5kg
3. Nick Haralambopoulos - 97.6kg - 185/120/250 - 555kg
4. Wayne Kollen - 99.8kg - 200/130/225 - 555kg
5. Josh Rayson - 96.9kg - 185/120/220 - 525kg
6. Kris Baldry - 99.7kg - 200/105/205/510kg
7. Ronnie Chau - 94.6kg - 170/100/242.5 - 512.5kg
8. Ross Katsambis - 97.7kg - 170/105/215 - 490kg
9. Jake Clinch - 95.1kg - 70/140/75 - 285kg
10 . John Nichols - 93.6kg - 80/75/75 - 230kg
11. Aaron Scarborough - 96.6kg - 80/80/65 - 225kg

110kg class
1. Daniel America - 104.3kg - 230/140/260 - 625kg
2. Nick Rankin - 102.3kg - 200/140/240 - 580kg
3. Will Grainger - 105.8kg - 215/125/230 - 570kg
4. Duke Catherine - 108.2kg - 135/105/190 - 430kg
5. Jeremy Buchanek - 101.1kg - 80/75/75 - 230kg
6. Gregg Gordon - 108.5kg - 80/75/75 - 230kg

125kg class
1. Zoran Jankovski - 114.3kg - 250/145/292.5 - 687.5kg
2. Joe Zollo - 119.1kg - 220/120/240 - 580kg
3. Alan Kissick - 116.8kg - 165/105/215 - 485kg
4. James Thompson - 116.0kg - 110/85/175 - 370kg

140kg class
1. Spiros Markopoulos - 128.0kg - 70/152.5/75 - 297.5kg

SHW
1. Jack Pollard - 148.1kg - 280/170/280 - 730kg

EQUIPPED MEN

100kg class
1. Barry Murray - 97.1kg - 200/160/200 - 560kg
2. Brendan Hains - 95.1kg - 270/BMB/260 - BMB

BENCH ONLY

WOMEN

82.5kg class Equipped
1. Emma Bortolotto - 81.9kg - 90kg

MEN

100kg class
1. Laird Ross - 93.9kg - 180kg
2. Alen Pezerovic - 93.9kg - 130kg


Stoked, got my 102.5kg x3 bench out last night!!!

Week 7 here I come.

Tried doing some paused reps on 90kg and wow that makes it about fifty times harder. No way would I get 102.5kg out without utilizing the stretch-shorten cycle.

the pause does get easier the more you practice it... just have to concentrate on keeping tension

That's what I've found when I've dicked around with the pause. You habitually allow too many muscles to relax when you pause, as your mind wants to use it as a chance to rest....when in reality you want the exact opposite! Keep those muscles tensioned haha

SS as in starting strength?

SS is 3 sets of 5 reps for working sets for sq, bench, OH press

Deads is 1 set of 5 reps

Power cleans are 5 sets of 3 reps.

There are no 5 working sets apart from the power cleans.

and warms ups is a personal thing... if I only did 2 warm up sets and got straight in to the work sets, I'd break more frequently than I do now.

SS as in starting strength by Mehdi

think the program has changed slightly but I could very well be wrong.

Workout A:

Squat

Bench

Barbell Rows (I don't do these, I do seated cable. Reason is I get heaps of pain in my wrist joints from it)

Workout B:

Squat

Overhead Press

Deadlifts

Straight from his book that he sends to everyone:

"You'll do 5 sets of 5 reps (5x5) with the same weight on every exercise after you've done

your warm-up sets. There's 1 exception, Deadlifts, where you'll only do 1 set of 5. Here's
why: 5x5 or even 3x5 Deadlifts would mess with your recovery and cause stalling because
you're already doing 5x5 Squats 3x/week. I urge you to stick with 1x5 Deadlifts."
"Never jump straight into your work weight, warm-up first. As an example, let's say your
work weight for the Squat is 135lbs. Then here's how your training would look like...
• 2×5 45lbs => 2 sets of 5 reps with the empty Olympic bar
• 3 x 90lbs => 1 set of 3 reps with the 45lbs bar + 22.5lbs/side
• 5 x 135lbs => first set of 5 reps with your work weight
• 5 x 135lbs => 2nd set of 5 reps with your work weight
• 5 x 135lbs => 3rd set of 5 reps with your work weight
• 5 x 135lbs => 4th set of 5 reps with your work weight
• 5 x 135lbs => 5th and final set of 5 reps with your work weight"
"Notice that on the Deadlift you only do 1 set of 5 reps, not 5x5 or 3x5 because that could
cause stalling when combined with 5x5 Squatting 3x/week. So let's say your work weight
on the Deadlift is 225lbs, here's then how it would look like:
• 5x 135lbs => 1 set of 5 reps, 1st warm-up set
• 5x 175lbs => 1 set of 5 reps, 2nd warm-up set
• 5x 225lbs => 5 reps with 225lbs, your work set"
No mention of power cleans
If you want to read the entire book that he sends
there it is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
    • I forgot about my shiny new plates!
    • Well, apparently they do fit, however this wont be a problem if not because the car will be stationary while i do the suspension work. I was just going to use the 16's to roll the old girl around if I needed to. I just need to get the E90 back on the road first. Yes! I'm a believer! 🙌 So, I contacted them because the site kinda sucks and I was really confused about what I'd need. They put together a package for me and because I was spraying all the seat surfaces and not doing spot fixes I decided not to send them a headrest to colour match, I just used their colour on file (and it was spot on).  I got some heavy duty cleaner, 1L of colour, a small bottle of dye hardener and a small bottle of the dye top coat. I also got a spray gun as I needed a larger nozzle than the gun I had and it was only $40 extra. From memory the total was ~$450 ish. Its not cheap but the result is awesome. They did add repair bits and pieces to the quote originally and the cost came down significantly when I said I didn't need any repair products. I did it over a weekend. The only issues I had were my own; I forgot to mix the hardener into the dye two coats but I had enough dye for 2 more coats with the hardener. I also just used up all the dye because why not and i rushed the last coat which gave me some runs. Thankfully the runs are under the headrests. The gun pattern wasn't great, very round and would have been better if it was a line. It made it a little tricky to get consistent coverage and I think having done the extra coats probably helped conceal any coverage issues. I contacted them again a few months later so I could get our X5 done (who the f**k thought white leather was a good idea for a family car?!) and they said they had some training to do in Sydney and I could get a reduced rate on the leather fix in the X5 if I let them demo their product on our car. So I agreed. When I took Bec in the E39 to pick it up, I showed them the job I'd done in my car and they were all (students included) really impressed. Note that they said the runs I created could be fixed easily at the time with a brush or an air compressor gun. So, now with the two cars done I can absolutely recommend Colourlock.  I'll take pics of both interiors and create a new thread.
×
×
  • Create New...