Jump to content
SAU Community

Fs: Hel Braided Rear Lines, Catco 3" Hiflo Cat, Sony Xplod 4Ch Amp, 12" Sub, Blitz Dd Bov, R34 Gtr Carbon Wing Blade


Recommended Posts

clearing out some stuff...

*HEL braided rear brake lines suit R33 GTS-T (maybe R34 GTT?) BRAND NEW in box (only used the fronts) - $40

*Catco 3" hi flow Cat with no flanges as they have been cut off, honeycomb in good nick, no broken pieces or rattly shit inside - $80

*Sony Xplod 4ch amp (will get exact specs and watt ratings over the weekend but was enough to power a 800W sub perfectly) - $60

*12" Clarion subwoofer 800W, minor scuff marks on cone but not ripped or torn - $60

**buy the amp and sub together for $100**

*Blitz DD blow off valve, universal hose adapter style flange - $50

*R34 GTR carbon wing blade left over from the group buy $80

*R33 B Pillar carbon covers (use 3m tape or sikaflex to stick them on over the original pillars) left over from the group buy $80

will update this thread as i find more stuff to clear out

located near Liverpool Krispy Kremes NSW,

prices are for pick up, will post at buyer's expense. may be flexible on price on some things but prices are already low and cheap as it is.

Pm for any queries.

Cheers

could you send me some pics of the brake likes and the cat. interested in both.

cheers

PM me KCV.

all PM's replied

also have S & R series solid Subframe collars, BRAND NEW $50

looks exactly like these

187159840.jpg

also got for sale an apexi metal pod filter shield suit apexi pods (may fit other pod filters of same/similar size)! after $30 + post.

81986d1281749987-loving-apexi-power-intake-filter1.jpg

Apexi_507-M009_1.jpg

**metal shield in bottom right corner of picture

Had a guy who was interested but haven't heard back from him so yes they are still available.

Pics of carbon wing blade can be found in the group but section from my first group buy. It isn't a direct fit hence why the price is so low, pics and instructions on what's needed to fit is in the thread.

PM'd

If blade doesn't fit with standard endcaps, then I'll withdraw.

I read your Post #81 in the link & understood that this does fit within the endcaps - hmmm hope so...

Thanks dori

Hi Terry, with the standard End caps fitted, it is unfortunately a few mm longer, easiest fix would be to shave down the ends of the wing blade a few mm each side so the end caps can be used..

measurements below:

Carbon wing blade : 130.8cm

Original OEM blade with end plates: 131.3cm

Original OEM blade without end plates: 130.3cm

End Plates: 5mm each

so they are approximately 5mm shorter/longer with/without end plates.

More info here

http://www.skylinesaustralia.com/forums/topic/390222-carbon-goods-for-r32r33r34/page__st__200

Cheers

I had a look at the link Dori. I'd still like to use the OEM end caps, so what would you use to safely shave off 5mm without mucking up the edge?

Ta

Hey Terry,

only 2~mm on each side will need to be taken off to perhaps on a belt sander or something, i am not sure lol

best speak to your panel beater and see what they recommend :)

dori34, I'll take the amp if you will do $40 pickup this weekend (I'm assuming you still live in Cabra?)

  • 1 month later...
  • 2 weeks later...

Yo Dori, I know this is old and your all homo with your family car now :P But any chance you still have those rear lines? (Cant see it saying sold anywhere??)

  • 2 weeks later...
  • 2 weeks later...

BUMP

3" hiflow catco co SOLD

Whats left:

also have S & R series solid Subframe collars, BRAND NEW $40!!!!

*Blitz DD blow off valve, universal hose adapter style flange - $30!!!!

apexi metal pod filter shield suit apexi pods (may fit other pod filters of same/similar size) $20!!!!

R34 GTR Carbon style wing blade - requires minor modding to fit - more info here http://www.skylinesa...4/page__st__200

$80!!!!!

  • 3 weeks later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...