Jump to content
SAU Community

Recommended Posts

Since you are new I will cut you a break, but please in future before posting a new thread use the search function - this topic has been covered dozens of time before.

Easiest way to do it is disconnect your battery and pump the brake pedal 10 times. Or leave the battery disconnected overnight.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506058
Share on other sites

^^ this method did not work on my 2005 V35.. I am assuming the OP wants to clear the self learn data, which will need consult or a datascan tool (not sure if there is a manual procedure for this?)

Doubt you will notice any difference, unless a faulty sensor has been messing up the data previously.

maybe removing the battery works for earlier ECUs??

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506355
Share on other sites

pv35gt8 he never mentioned anything about fault codes .... read the topic content before you post ....

And sonicii in my 03 coupe it most definitely does work - I can feel the difference and see the fuel economy difference when I reset my ECU. Why else would they tell you in the installation instructions of things like the Kinetix upper plenum to reset the ECU via this method after fitting the upper plenum to see results? Maybe the series II ECU is different, but I can't imagine for a second the cars auto tune saves to flash.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506392
Share on other sites

^^ this method did not work on my 2005 V35.. I am assuming the OP wants to clear the self learn data, which will need consult or a datascan tool (not sure if there is a manual procedure for this?)

Doubt you will notice any difference, unless a faulty sensor has been messing up the data previously.

maybe removing the battery works for earlier ECUs??

It should work. It worked on my 2001 VQ25det Stagea and still works on my 2004 VQ35de Stagea (basically an AWD Series 2 V35... with a nicer nose/body :P).

Perhaps your timing was a little out. It can be easy to miss-time.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506398
Share on other sites

pv35gt8 he never mentioned anything about fault codes .... read the topic content before you post ....

And sonicii in my 03 coupe it most definitely does work - I can feel the difference and see the fuel economy difference when I reset my ECU. Why else would they tell you in the installation instructions of things like the Kinetix upper plenum to reset the ECU via this method after fitting the upper plenum to see results? Maybe the series II ECU is different, but I can't imagine for a second the cars auto tune saves to flash.

You need to retrieve the fault codes and clear them before you initiate a relearn.

Simply disconnecting the battery and letting the system completely drain any residual power will not reset the ECU.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506547
Share on other sites

It should work. It worked on my 2001 VQ25det Stagea and still works on my 2004 VQ35de Stagea (basically an AWD Series 2 V35... with a nicer nose/body :P).

Perhaps your timing was a little out. It can be easy to miss-time.

Sorry, you managed to slip your last post in just before I hit send. I meant the disconnecting the battery method didn't work for me.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506730
Share on other sites

pv35gt8 he never mentioned anything about fault codes .... read the topic content before you post ....

And sonicii in my 03 coupe it most definitely does work - I can feel the difference and see the fuel economy difference when I reset my ECU. Why else would they tell you in the installation instructions of things like the Kinetix upper plenum to reset the ECU via this method after fitting the upper plenum to see results? Maybe the series II ECU is different, but I can't imagine for a second the cars auto tune saves to flash.

It probably is a good idea to clear this data when making any significant changes. But I reset mine a couple of months back and reduced my fuel economy for a while.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506737
Share on other sites

Where the hell is Suriname anyway?

South America, like North East. Google FTW. Was going to say "Hola", but then wiki says they speak Dutch :(

Sorry, you managed to slip your last post in just before I hit send. I meant the disconnecting the battery method didn't work for me.

+1

You car doesn't magically lose its ECU coding when there isn't a battery connected, so it ain't going to lose the self learn. Pump zee pedal, or get a program that works, like Cipher.

Link to comment
https://www.sau.com.au/forums/topic/407984-ecu-reset/#findComment-6506753
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My thought is if you were just moving it forward and the upstream geometry remained the same, then no difference at all. But because the current one has the filter direct into the AFM inlet, you effectively have the best chance of a completely symmetric air flow profile upstream, and in, the AFM, whilst the aftermarket inlet thingo has a (small, to be sure) bend between the filter and the AFM. That would bias the flow to the outside of the bend (downstream of the bend) which might well reduce the size of the signal seen by the AFM, for the same total flow rate. Having said that: If you're proposing to make your inlet look like a hybrid of your existing one and the aftermarket one, such that there is no bend where the filter is clamped on... then I say it will be just fine. If there is going to be such a bend, then, if you can align the insertion of the AFM blade such that it is at right angles to the plane of the bend, then there is a better than even chance that the centreline velocity where the blade is will remain more or less the same, and the velocity will just be a little faster to the outside of that, and just a little slower to the inside. **This is not professional investment advice and you should consult a suitably qualified ouija board, tea leaves or the intestines of a goat for more accurate prognostication.
    • Hi Tao, Thanks for your reply.  It's been a while and I managed to get the valve stem seals replaced with the head on the car.  Unfortunately this didn't solve my issue, the car still smokes a lot after idling (to be honest during idle you can see a bit of blue smoke from the exhaust), same after deceleration. I will try disconnecting the valve cover breathers, do I leave the PCV valve in? By engine oil drain pipe, do you mean the turbo oil drain?
    • What about if you just give it direct 12v and earth?
    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
×
×
  • Create New...