Jump to content
SAU Community

Recommended Posts

1992 HCR32 GTST - REAR END DAMAGE.

COLOUR: GUN METAL GREY

Location: Holsworthy NSW 2173

PICKUP IS PREFERRED, HOWEVER POSTAGE CAN BE ARRANGED AT **BUYERS** EXPENSE.

Contact; PM is preferred or SMS to 0435 120 602.

If you wish to talk over the phone feel free to try ringing me, however reception is bad and i cannot answer my phone during work hours. Also pretty busy on weekends.. so good luck! ;)

:)

If someone wants the shell whole, let me know and we can discuss a price.

Please ask for parts if not listed, the whole rolling shell is available (bar a few items).

I will list the big ticket items.

Car needs to remain rolling for the time being, so suspension / 5 stud / brakes will be sold last.

Everything is as pictured, if you require more pictures please notify me so that i can attain them for you.

Please NOTE ** ENGINE AND GEARBOX + TAIL SHAFT ARE NOT AVAILABLE.

Please NOTE ** ALL PANELS ARE GUNMETAL GREY, EXCEPT CARBON FIBER BONNET .. IT LOOKS LIKE CARBON FIBER..

AVAILABLE NOW;

Front bar as pictured (pretty average condition, would suit drift pig) - $50

Front Reo - $100

Front Sway bar - $40

Rear Sway bar - $40

Smoked out indicators (mint condition) - $80

LH + RH Doors (passenger door near mint, drivers side average condition - $100 ea.

RB26 FRONT PIPES (twin 2.5" inlets to approx 3" rear) - $150

Aircon / Heater Vents all available except drivers lower vent - $100 for all (purchaser will need to remove most likely) ??

LH + RH OEM Indicators (mint) - $150 pair

Windscreen Washer bottle, not leaking - $20

Coolant Overflow Resevoir, not leaking - $20

Power Steering Resevoir, not leaking - $20

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - $80 for pair

Rear Seat excellent condition - $50

Centre Console in ok condition - $50

Faschia Surround, one clip broken apart from that decent condition - $50

Seatbelts FRONT ONLY ADR APPROVED - $20

Rear Window Wiper Motor / Blade Assy - $20

Skyline Door Trims, both in good condition - $40 pair

Fuel Flap - $20

GTSt OEM Spoiler w/ Integrated brake light - $80

2 x K&N Pod Filters suit RB26 - $150

Standard LSD, still nice and tight - $200

ALL GLASS AVAILABLE IN GOOD COND - BUYER REQUIRED TO ORGANISE REMOVAL PRICE: TBA ??

AVAILABLE LATER;

Tien Super Streets - condition TBA - price TBA

R32 GTR Front + Rear Brakes w/ DBA4000 Series Rotors front and rear with pleanty of life. Unsure what pads are on there but they are yours regardless.

Can also sell 5 stud conversion / hubs etc.. -

$400 for Calipers / Rotors / Pads.

Hubs will be extra.

I also have some gear that i'm not sure i want to sell.. however let me know if your really keen.. and willing the pay the coin.

Genuine N1 GTR Headlights, Immaculate - $350 pair

Mu's Secret Carbon Fiber Bonnet w/ bonnet pins - $100

LH + RH Side skirts (good condition) - $200 pair

LH + RH Guards in decent condition - $200 pair

R32 GTR NISMO CLUSTER 260kph / 10k rpm ODO 78568 - $300

Trust Front Mount I/C NO PIPING - $150

post-75263-0-55515600-1346660269_thumb.jpgpost-75263-0-89629900-1346660279_thumb.jpgpost-75263-0-04067300-1346660287_thumb.jpgpost-75263-0-18387000-1346660307_thumb.jpgpost-75263-0-35505900-1346660327_thumb.jpgpost-75263-0-43567300-1346660347_thumb.jpgpost-75263-0-24654900-1346660476_thumb.jpgpost-75263-0-10291300-1346660484_thumb.jpgpost-75263-0-20544300-1346660492_thumb.jpgpost-75263-0-86130200-1346660499_thumb.jpgpost-75263-0-69831300-1346660507_thumb.jpgpost-75263-0-67330000-1346660514_thumb.jpgpost-75263-0-15262000-1346660520_thumb.jpgpost-75263-0-68252000-1346660539_thumb.jpgpost-75263-0-48994800-1346660547_thumb.jpgpost-75263-0-75714200-1346660554_thumb.jpgpost-75263-0-15632800-1346660561_thumb.jpgpost-75263-0-71851500-1346660567_thumb.jpgpost-75263-0-20569800-1346660578_thumb.jpgpost-75263-0-86347300-1346660584_thumb.jpgpost-75263-0-36257700-1346660627_thumb.jpgpost-75263-0-27374900-1346660633_thumb.jpgpost-75263-0-37458600-1346660639_thumb.jpgpost-75263-0-98317700-1346660646_thumb.jpg

Edited by Willis
Link to comment
https://www.sau.com.au/forums/topic/408441-syd-stripping-1992-hcr32-gtst/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Hey man, im interested in your N1 lights, however i would like to make sure they ARE genuine.

Are the clips that hold the GTR grille on steel and screwed on, or are they plastic and actually moulded into the light itself?

I believe they are plastic and molded into the light itself.. i will get a specific photo of the mount for you tomorrow. Pretty sure they are legit.

Smoked out indicators (mint condition) - SOLD

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - SOLD

Smoked out indicators (mint condition) - SOLD

Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc - SOLD

Front Reo - SOLD

LH + RH Side skirts (good condition) - SOLD

Rear PODS - SOLD

Some more photo's.

Trust intercooler is a bargin. Not pretty but doesn't leak, was running on 240awkw 32 GTR..

post-75263-0-63594700-1347354302_thumb.jpgpost-75263-0-65134900-1347354321_thumb.jpgpost-75263-0-81286800-1347354340_thumb.jpg

And the K and N filters / intake piping?

post-75263-0-71993500-1347354354_thumb.jpgpost-75263-0-18126400-1347354369_thumb.jpg

Want photo's of anything else? Hit me up.

Willis.

SOLD - Indicator Stalk

SOLD - Climate control cabin temp sensor

SOLD - Smoked out indicators (mint condition)

SOLD - Front Reo

SOLD - Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc

SOLD - Rear PODS

SOLD - LH + RH Side skirts (good condition)

Also price rise on Carbon Fiber bonnet, asking $400 (been informed that the damage is only cosmetic, and that carbon fiber is apparently quite valuable..)

and; Front seat belts ADR approved, asking $50

Price reduction on "N1 GTR Headlights" - I've been informed that these aren't "N1" headlights as they don't have the bracket for the grill.

As such price is reduced to 250 ono.

Sorry for lies!

Edited by Willis

SOLD - Indicator Stalk

SOLD - Climate control cabin temp sensor

SOLD - Smoked out indicators (mint condition)

SOLD - Front Reo

SOLD - Drivers and Passenger seats, passenger in good condition, driver side has typical tear in bolster apart from that good condition nice and clean etc

SOLD - Rear PODS

SOLD - LH + RH Side skirts (good condition)

PENDING PAYMENT - Bare Shell (not rolling)

PENDING PAYMENT - LH + RH Doors (passenger door near mint, drivers side average condition

Price drop on apexi filters; now - $50.

Hey mate, after the brakes if theyre still for sale?

Thanks

Hey budd, yep they are yours pending pickup along with the 5 stud hubs etc.

Hey,

Was wondering if you have the starter motor? And how much you wanting for it?

Cheers

Sorry mate, all the engine / accessories are gone!

Hey mate,

Saw some one asking about a standard steering wheel, just wondering if it is for sale how much and pictures if possible.

pm me if still for sale

cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...