Jump to content
SAU Community

Recommended Posts

On an R33 in 5th gear divide the revs by 26. Thats a pretty close calculation. So 7000rpm in 5th gear is 269.23km/h. My car cuts out at about 5250 which is 201.9km/h. I don't understand why though as this is more than the factory 180km/h and when it hits it it's a rev limiter. Doesn't slow down at all and starts backfiring all over the place.

I have been well over 200 but the problem is, I dont think the speedo is too accurate at those kinds of speeds. From what I have seen 250 can be done(I have 19's though) and I think you might be able to push 265-270 maybe? Car floats a bit at those speeds and it is something I wont be doing again, way too un-safe!

On an R33 in 5th gear divide the revs by 26. Thats a pretty close calculation. So 7000rpm in 5th gear is 269.23km/h. My car cuts out at about 5250 which is 201.9km/h. I don't understand why though as this is more than the factory 180km/h and when it hits it it's a rev limiter. Doesn't slow down at all and starts backfiring all over the place.

The speedo is not right at those speeds I think.

Just so people don't lose sight of reality. (Not saying any of you are, just saying just in case.)

I've seen the results of a Monaro that was doing 250 on a freeway and lost it due to what at 110 km/h would be a small undulation but at 250 must have been a lot worse.

Car came to rest 250 metres down the road and 100 metres or so off to the left, set itself on fire and pretty much disintegrated. The guy died in the fire but probably wouldn't have made it anyway cos he was fairly mangled.

Below is the result of hitting a rock at speed when a car pulled out infront of us(not me driving). We were lucky though all that happened was I got a broken hand. Pic quality pretty bad as it was taken on a phone. Oh and that's the fuel tank on the back seat.

OUCH, Thats nasty!!!

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So either way it is gearbox out and look what is wrong?  I know about the input shaft bearing. Even before swap/new clutch the it sounded exactly like this: So is that inout shaft bearing or the other was installed backwards?  And can some please tell me the part number for that input shaft bearing? The gearbox is small box from R34 N/A and number is FS5W71C. Thank you  
    • I am yet to see anyone ever regret a quaife or helical. ...other than drifting/skidpan duties. I kind of want to upgrade my factory helical with a Quaife (but really it's not ultimately that different, and is a MASSIVE UNDERTAKING), that's how good the hype is about them, that I want to try them 'just to see'  
    • D2 and Ksport are essentially the same thing and basically just generic Taiwanese manufacture. Better than ChinaBay crap, but... not top shelf. Öhlins have got to be some of the best dampers around, so likely to be a good option. It's going to get to the point though where I suggest you buy from Oz. We have at least 2x excellent options here. If I were you though, I'd be talking to KW about doing something for the R33. There's bugger all difference between that and the 32. In GTR land, anyway.
    • KW only offers a set for the R32 GTR. Popular options are D2 racing, Ksport or Öhlins. I have a D2 Racing coilover set, though I don't know for sure which one.
    • Well, the good news is you have more than one very good option for new coilovers in and around your country. Worth the drive over to KW to talk about GTR stuff.
×
×
  • Create New...