Jump to content
SAU Community

Recommended Posts

I didnt do it myself but the guy who i bought it off. Everything seems fine with the engine, but the car is running way too rich...so much smoke and smell.The engine is running low compression pistons since its was originally a rb20det. What can i do? put non turbo injectors and/or change the fuel pump?

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Injectors etc probably arent going to help, more likely an ECU will...... But i must ask WHY did he remove the turbo? The RB20DET - T would be terrible to drive? (No offense)

Injectors etc probably arent going to help, more likely an ECU will...... But i must ask WHY did he remove the turbo? The RB20DET - T would be terrible to drive? (No offense)

crap power low end but it picks up like a skyline should after like 5500rpm. BTW i think there is already an ecu..u cant just take the turbo off and expect your car to run...it wont!

crap power low end but it picks up like a skyline should after like 5500rpm. BTW i think there is already an ecu..u cant just take the turbo off and expect your car to run...it wont!

Oh it'll run just fine.

Might be a lil' rich though.

an NA that piks up after 5500. Far out. your on p's by the sound of it?

the only money id spend on that is to get a rb25de and bolt in.

you think there is an ECU? is this car on bricks?

go fist yourself, i want to drive a non turbo r32, f**k me right? i dont care ive been looking for a factory gts for a while now and most of them are either auto or are really expensive. They are rare...more and more r32's are off the street nowadays. The car drives fine, it just runs rich.

You said its got a non turbo computer? What colour are the injectors? pink or red?

Also a rooted o2 sensor will cause this.

injectors are greyish black

here's a picture of the ecu...it looks aftermarket : http://imgur.com/2UWCH

injectors are greyish black

here's a picture of the ecu...it looks aftermarket : http://imgur.com/2UWCH

Looks like the NISTUNE logo and Envy Dyno.......

Looks like the NISTUNE logo and Envy Dyno.......

ye i told you it had an different computer

id also like to mention im still using the factory turbo manifold...its been modified to go straight to the dump pipe. Maybe its a bit restrictive? getting different headers will be one of the first mods id do.

go fist yourself, i want to drive a non turbo r32, f**k me right? i dont care ive been looking for a factory gts for a while now and most of them are either auto or are really expensive. They are rare...more and more r32's are off the street nowadays. The car drives fine, it just runs rich.

haha, hit a sore point did i mate?

Sorry, your car is not rare. But... What you could do.Is grab a NA rb25de for Say $500, Bolt it in. Not only will you have a stock DE motor, But will be able to enjoy the extra .5 Lt. Win win is it not?

Otherwise you could spend money on what you currently have....And still be drving around in a low comp 2L NA

Edited by sydking

haha, hit a sore point did i mate?

Sorry, your car is not rare. But... What you could do.Is grab a NA rb25de for Say $500, Bolt it in. Not only will you have a stock DE motor, But will be able to enjoy the extra .5 Lt. Win win is it not?

Otherwise you could spend money on what you currently have....And still be drving around in a low comp 2L NA

and pay thousands to get it engineered? no thanks bro

Edited by IM-32-FK

Definetly buy a rb25de motor, cheap as compared to fixing yours to run properly as will only take a day to fit of you have some knowledge. Also will go way quicker than what's in there now

Hmmm, you should watch what you are talking about. As for his suggestion of putting a proper non turbo motor in there is the smartest decision you will ever make.

As for why your car is running shit? Its because the turbo is missing doofus. And want to know another thing? Your non turbo'd car is still illegal for you to drive on your p's because it was registered as a turbo.

So instead of spitting in people's faces like a spoilt brat, just take what he says and reply in a manner as follows, no thank you, I would rather try something else

and pay thousands to get it engineered? no thanks bro

lol u driving a non turbo 4 wheel drive r33 ROFL what a joke why bother having 4 wheel drive when your car dont even have power lolololololol

Doesn't need to be engineered as its a factory motor designed for that chassis. Also awd helps heaps in wet, I know my rwd r33 has stepped a few times when you don't want it to.

Also, what's with the attitude, why bother asking for help of your not going to take it positively

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...