Jump to content
SAU Community

Recommended Posts

No. If you read what you yourself have written, you will see that the act of drifting requires a lot of longitudinal drive force to be expended to make the car want to follow a curve for which its corner entry speed is too high.

Brute force over elegance.

No. If you read what you yourself have written, you will see that the act of drifting requires a lot of longitudinal drive force to be expended to make the car want to follow a curve for which its corner entry speed is too high.

Brute force over elegance.

i think you just said a whole lot of words without really making sense. you might be thinking of powersliding, but you don't need bulk longitudinal drive to drift, a lot of drift cars dont have much of it, but the good thing is if you do have it, with drift you can use it to steer the car as the whole car is pointed towards the exit of the corner as opposed to even your most wild slip angle a grip car might carry where the rears are still pointing and pushing you towards the outside of the corner (ie not where you wanna go).

drift is the very essence of car balance, the fact that it's been basterdised into barely more than a powerskid comp in some areas of the world doesn't take away from the fact that the sport was formed in cars which didn't have enough power to even do a standstill burnout, they used careful weight shifts and well placed line to continue a drift.

i think you just said a whole lot of words without really making sense. you might be thinking of powersliding, but you don't need bulk longitudinal drive to drift, a lot of drift cars dont have much of it, but the good thing is if you do have it, with drift you can use it to steer the car as the whole car is pointed towards the exit of the corner as opposed to even your most wild slip angle a grip car might carry where the rears are still pointing and pushing you towards the outside of the corner (ie not where you wanna go).

drift is the very essence of car balance, the fact that it's been basterdised into barely more than a powerskid comp in some areas of the world doesn't take away from the fact that the sport was formed in cars which didn't have enough power to even do a standstill burnout, they used careful weight shifts and well placed line to continue a drift.

For my ten cents worth I think there is a common misunderstanding that alot of people have.

Put correctly any tyre that is producing lateral grip is generating a slip angle.

Also steering a car on the throttle is a common technique in just about all forms of motorsport.

It is still common to see cars pointed well inboard of the apex of the corner due to the slip angles generated by front and rear tyres. Admittedly not as much as the olden days when slip angles used to be much bigger but enough. It is most pronounced in low powered categories with no downforce eg the formula vees and fords do it alot.

For my ten cents worth I think there is a common misunderstanding that alot of people have.

Put correctly any tyre that is producing lateral grip is generating a slip angle.

Also steering a car on the throttle is a common technique in just about all forms of motorsport.

It is still common to see cars pointed well inboard of the apex of the corner due to the slip angles generated by front and rear tyres. Admittedly not as much as the olden days when slip angles used to be much bigger but enough. It is most pronounced in low powered categories with no downforce eg the formula vees and fords do it alot.

at large radius corners with high G's and big slip angles, yes your rears will be pointing towards the exit, but like i said, with even the most wild slip angles, on tight radius corners your average grip car isn't coming anywhere near the rear wheels pointing towards the exit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • It's funny, as Ive seen plenty of people use them in cheap builds on YT. And they actually go okay, even though a lot of other maxspeedingrods stuff is terrible. Those turbos seem reliable enough, the only part being, a good quality turbo that is "identical" to it, will out perform it day in and day out. In both a lower boost threshold, and the ability to flow more air at the same boost pressure. As a cheap cheap replacement, not a terrible choice. For cheap and shouldn't blow in a day, not terrible (like other eBay/Temu turbos) for low cost and still decent performance, that's where the question comes in to play from the results I've seen. I'd actually find it hilarious to buy one, and strap it to a paddock basher or some other cheap as POS originally NA car, and send it to the moon!
    • The maxpeedingrods turbo is cheap and bolts on to stock parts. I think you just need a bigger silicone coupler for the intake. Its a cheap china turbo, but it's been running on mine for almost 3 years at 16-19 psi.
    • What do they look like right after you've tried to start it with everything connected? Also post photos of what they actually look like.
    • Also wanted to say, my new spark plugs are blackened looks like it's very rich. I have splitfire coilpacks but stock coilpack loom and ignitor. I tried directly grounding the ignitor ground to body as well. 
×
×
  • Create New...