Jump to content
SAU Community

Rb25 Cold Start Valve Clean

HR32GTS 4DOOR

By HR32GTS 4DOOR,
in Tutorials / DIY / FAQ

 Share

Recommended Posts

  • 2 months later...
  • 3 weeks later...
  • 2 weeks later...
  • 1 month later...
EZSLDR Apprentice

EZSLDR

Posted
Posted

Hey ive got a r32 with a rb25 ive had a few issues since owning it plugs not in dogde wiring etc etc (picked it up cheap!) i checked my cold start and theres no plug there! looked for a plug but i cant find one it has a wasted spark set up so im wondering if the plug was attatched to/in the coil loom? and has been cut? just wondering where id re wire it in? cheers

HR32GTS 4DOOR Community Regular

HR32GTS 4DOOR

Posted
  • Author
Posted

Hey ive got a r32 with a rb25 ive had a few issues since owning it plugs not in dogde wiring etc etc (picked it up cheap!) i checked my cold start and theres no plug there! looked for a plug but i cant find one it has a wasted spark set up so im wondering if the plug was attatched to/in the coil loom? and has been cut? just wondering where id re wire it in? cheers

Do you know if your car is wired with a 20 or 25 loom? mines an r32 with a 25 and 20 loom, ill have a look tomorrow if the plug is connected to the coilpack loom, but i don't think it is.

  • 2 months later...
tripsteady Proficient

tripsteady

Posted
Posted

holy shit this was awkward to do, damn small Japanese hands. Those two 10mm bolts are a pain to get especially when u have to feel for them

My valve was squeaky clean as well when opened it up

Also cleaned AAC valve yesterday and throttle body. Still have the same sputtering when cold in the morning :(

  • Like 1
  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...