Jump to content
SAU Community

Recommended Posts

Hello,

I've brought this up before with no solution, just wanted to try again. I've got a 2.5" catback exhaust with 2 resonators. There is a tiny muffler on the end of the exhaust,

my problem is that it still drones. Is it even possible to get a RB25de to have a clear sound without drone at all?

What are some people running on their Catback systems?

Link to comment
https://www.sau.com.au/forums/topic/411374-exhaust-sound-issue/
Share on other sites

its the tiny muffler thats the issue, get a semi straight thru one,

my system has a hotdog resonator and a big oval muffler, the muffler is what muffles the drone the most, get a muffler thats semi striaight thru, so it curves inside, that will forces the gases to be muffled but not restricted , then your drone will come down ..

you need a either a large oval muffler or resonator .. police come straight after noisey cars..

Edited by SliverS2

are they hotdog resonators? thats odd because i have a 4L falcon with nothing but a large muffler on the back, and hardly any drone, sounds meaty actually. lol

Edited by SliverS2

doesnt look like much of a resonator, looks no better than a straight piece of pipe,

if it were me id have the big fat muffler on the back and an oval resonator, or id start there

WMDC5 is probably right, theres alot of honda's that sound like that,

a 2inch pipe size was probably better for the low power output too.

GL

hard to believe a good resonator and muffler wouldnt sound good without the drone, but i dont have an na, i know when i had a hotdog resonator with a cannon my car was extremely droning, i mean you got a headache after 5minutes

IMO whenever I have had just resonators that makes it drone. On my old motor na rb20 I had two hotdog style resonators sounded really nice under load but cruising it would be almost as loud and drone like crazy. Then I had the rear one replaced with an oval one and got rid of the drone almost completely, but made it sound not as good under load. Its a compromise really.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
    • Is this a brand new LSD? if so, have you followed any break/bed in procedure for it? Usually involves heaps of figure 8 patterns, a fluid flush.
    • It's TWO steering wheels actually. 😛 one for each hand They are wheels, and they steer!
×
×
  • Create New...