Jump to content
SAU Community

Recommended Posts

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Wheels is YUK mate.....the magazine for the dedicated taxi owner.

Sorry about the confusion. Maybe Motor magazine might have the detail as well. I don't read them though....i prefer EVO from GB.

You want some real data?

Victorian Police TOG - Holden Commodore

The standard patrol vehicle used by the TOG is a Holden Commodore V8, as pictured with the "American Style" lighbar. Unmarked Commodores are also used. Both are SS spec vehicles.

Performance (Holden Commodore VR SS manual):

0-100km/h 7.87 seconds

0-400m 15.91 seconds

Top Speed 221km/h

Not the correct spec but has the numbers, maybe.

but even if the cop was following to prove speed, and then use the supposed recordings of their speed, what if they were slowly catchin up to the car, therefore technically following, but going faster than the car they were following, therefore making their speed recordings of their car not comparible to the car they were following??? or if a cop says they were following, that's taken as bible?

I think this guy is trying to prove that the cop car couldn't be near him and is going to use "maths" to get out of the fine.

To do that he is going to use "maths" to say the cop car was only doing such and such speed, this is recorded by the cop car, so they'll be able to look this up.

What I've been saying is, you have to prove you weren't speeding.

He probably flew by the cop car and didn't know and got pulled over, and the guy is now spewing about it.

If that is the case then the guy will be well and truely stufffed as they would simply say yep flew by us at speed he were doing 80 or 100 when he went by.

Guest INASNT

dude do u need a hearing aid??? How many times have i said it was an unmarked exec VT car, not a SS, i know the farkin difference between a SS and a exec, and no it didnt have any speed measuring device coz it is not present in their evidence, just that they recon they followed me at X distance. And i didnt fly past any car coz the cops recon they were sitting behind a few cars behind me before it happened when we were stopped.

Have u ever done physics and maths in school? or r u an arts student??? coz i aint using maths to prove i wasent speeding, i am using facts that what they are claiming cant be done in the car they were driving in the distance and time it happened. Its am using facts and maths as the proof!!!

this is recorded by the cop car, so they'll be able to look this up.

:bs!:

Sorry, but I cant swallow this. There are too many variables that make such a device completely useless. The biggest 1 being wear'n'tear on the car and thats the very reason the ADRs allow a vehicles speedo to be out by a certain percentage.

Where is some proof?

:bs!:  

Sorry, but I cant swallow this. There are too many variables that make such a device completely useless. The biggest 1 being wear'n'tear on the car and thats the very reason the ADRs allow a vehicles speedo to be out by a certain percentage.

Where is some proof?

It's for that reason why they try too keep the speedo correct in cop cars all the time.

In NSW, VIC, SA all the WRX cop cars speed fines had to be refunded for the whole time they were on the road as they had found that the speedos were all out by so much, the WRX cop cars were around for 3-4 years.

That was last year and the WRX cop cars were taken off the roads in 2000-2001.

It's been on the news so you should be able to look up at news sites for the proper info.

That Car Point page would be correct, in that most people don't win, no matter what they say or tey to prove, but also says you can make it work but it's not easy by any means.

To prove your maths you'd have to have a court approved expert and stuff so the local machainc might not be good enough, also would need to be a car expert as well so you couldn't just pull joe blow off the street and try it out either.

Anyway, Most speed fines are binding so you have to prove you weren't speeding at that time or place.

I dont doubt that the cop cars speedos are calibrated every so often. Every speed measuring device they use must be calibrated every 6 months, wether it be a camera, radar, or speedo.

Just because fines were refuned does not mean they have a device that records thier speed.

The :bs!: was directed at the claim that cop cars have a device that records their speed every time they're driven.

zagan... as has been stated many times... THERE WAS NO OFFICIAL SPEED DETECTION DEVICE USED!

The cop was basically following him, decided he wes going at "xx km/hr" but the question is whether he accurately followed the car for an adequate distance to get a correct and accurate measure of this. But it does have to be for a certain amount of seconds, and an average reading is taken. This is what Inasnt is trying to obviously work out.

It is true the speedos are calibrated every xx,xxx km or x months.. and is probably quite admissable..BUT I have a feeling that the cop basically saw him "speeding", checked the speedo for a second, said "ok, I am going xx, he appears to be going xx I'll pull him over and try and pin him for that" then now its come to court he has to make the evidence to support this claim. Of course, he was hoping that it never came to this, as most of the time the cops just hope like hell the public doesn't actually use their brain and take it further.

Guest INASNT
stopping distance from 130 according to this site is 215m

http://www.csgnetwork.com/stopdistcalc.html

sweet, so basically the data i have now already shows the cops r talking BS coz the total distance they recon they followed me to the distance it took for them to accelerate and stop from the speed claimed is way over the distance of the actual road it happened on. Zagan get it now???????

Here is a quote from the carpoint article I posted before:

"It is difficult, but not impossible, to challenge experienced police. They don't even need speed detection equipment. If the policeman says he estimates you were traveling at 160km/h, the Magistrate is likely to believe him. It is then up to the driver to prove he wasn't."

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks Dose.....    I appreciate it!!
    • I'll probably be putting the shit box back on the dyno again soon, I want to dial in the closed loop boost control properly. I'll have a camera facing the car/motor for fun too. Just note, there are essentially 3x 10AN inlets going into the catch can and 1x going back to the intake pipe. Most of the time the catch can "return" to the sump actually is the crank case breather, pushing air out.
    • I have the R3C with a Nismo slave and by no means does it behave like a stocker, it ain’t THAT bad. On take off just give a bit more throttle than you would say a coppermix and it’s fine. It will not slip though.   
    • Okay. Final round of testing done. Got a friend to hook up a fancy scanner to the car and we also ran some compression and leakdown tests, she is healthy.  The MAF was definitely the culprit. So for future reference anyone with similar issues that find this thread. I suggest the following steps, in order of affordability:   Check your spark plugs for any fouling, replace plugs if they are bad or re adjust the gaps making it narrower (0.8mm would be good). Check every coil's resistance with a multimeter. It can be done by probing the IB and G pins on the coil pack. Resistance should be around 1.4 (+/- 0.1) Ohms Check the MAF. If you have Nissan connect or a good scanner with the 14 adapter it should allow you to see the voltage on the MAF reading should be around 1.1 - 1.2V when car is idling. But if you don't, buy a new MAF from Amazon and test, then return it. (For instance, I got a Chinese one for $40 that was reporting 1.3v on idle). If you still have scanner, you can run tests on the injectors to see if they are working, just remember to unplug the fuel pump fuse/relay and have no pressure on the line. Then listen for the noises that the injectors make. Clean/replace injectors as needed. Once you find the issue and fix, order thousands of dollars worth of OEM parts to refresh unrelated things (Optional)   PS: Thanks to the absolute legends of this forum for the responses and help to someone that went a bit over their head. (me)
    • Ha ha ha, so they stopped the bearings spinning on the one you want, but then decided the crank hub should slip instead 😛   Stick to RB, at least you can work on it yourself. And now it doesn't smell of vapour   Also I still believe there's a chance your new flap doesn't "pop", as even though the engine might breath hard, it has a direct path with no restriction to the inlet, which when on boost should pull a bit of suction for you. If you do get pressure in the catch can id be very intrigued. Time to put a boost gauge on it, and a session at the track, then solid cover your vent and do another session
×
×
  • Create New...