Jump to content
SAU Community

Y34 Gloria/cedric Owners Manual In English


rb26stagea

Recommended Posts

Easy to source, nice and cheap: what's not to like?

I have also been in regular contact with another Y34 owner who has successfully sourced (Maxima?) brake pads, and shimmed them to fit our cars: will post part numbers when I get them...

Also, just FYI: not sure if it's a common issue (I haven't experienced it), but he had ongoing, intermittent rough-running issues, which after much diagnosis turned out to be failing ignition coils.

Just a couple of things to bear in mind: once we get enough info, it may be a good idea to create a Y34 parts/service sticky thread, as there's precious little information available on the interwebs...

Link to comment
Share on other sites

Yeah i agree - i've found there's really not much info available on there however Aus-Vip.com i have found has a little.. not much.. but a little haha. I have the same intermittent rough-running issues but i had put it down to coilpacks as it seems to be the same sort of issue as what I had years ago in an S13 then replaced the coilpacks and all fixed.

I havn't bothered to buy new coilpacks yet for my Y34 but was planning on getting a set of Yellow Jackets from performance-wise.

Link to comment
Share on other sites

Also I had my radiator end tanks replaced which turned out to be the same/very similar to Navara radiator end tanks so they were used :)

And when i needed new brake pads I took the worn out pads to SA Brake & Clutch and they matched them up with some replacements - no modification was needed either.

Link to comment
Share on other sites

yeah: the brake pad thing seemed a little odd to me: I figure I'll be able to source a set of Endless or similar quite easily. Will do some research to ascertain whether ours are the same as the USDM M45- I'd say it's a pretty safe bet. Also, have seen a number of Y34s going at auction with what I believe to be CPV35 Brembos fitted, so it may be that we run the same brakes as a non-brembo V35, given Mr. Nissan's tendency to use interchangeable parts.... Once again: more research required.

Link to comment
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The time has come once again, for another SAUNSW Sunday Session! You all know the drill by now, fam... This is the perfect event to catch up with the SAUNSW crew, hang out for a coffee and a bite to eat, and get in some photos and friendly banter! So without any ado, here are the details: Date: Sunday 14 July 2024 Meet Location: Penrith Krispy Kreme (at Penrith Panthers - Panthers Place, Mulgoa Rd, Penrith) Meet Time: 8:00am Map: https://tinyurl.com/saunsw-penrithkk  This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAUNSW event and will be run under a Motorsports Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Who's itching for another cruise...?? That's right! You are! And so are we! And what better cruise to run than an Old Pac Run!! So without any ado whatsoever, here are the details for you to save: Date: Saturday 22nd June 2024 Meet Location: Cowan Truck Stop (Pacific Motorway - Refer to Map) Meet Time: Meet at 7:00pm for a 7:30pm departure Destination: Gosford McDonald's (65 Pacific Highway, Gosford West) Map: https://www.google.com.au/maps/dir/Cowan+Rest+Area+-+Truck+Stop,+Cowan+NSW+2081/mcdonalds+gosford/@-33.5145054,151.1875996,11z/data=!4m39!4m38!1m30!1m1!1s0x6b0d50be6b302f7b:0x52a920c40b292919!2m2!1d151.1590113!2d-33.6115097!3m4!1m2!1d151.1632842!2d-33.6047898!3s0x6b0d509345312641:0xb510e358747a5332!3m4!1m2!1d151.2008176!2d-33.5274838!3s0x6b0d4e5adac43725:0x611c05fee203a98a!3m4!1m2!1d151.1925869!2d-33.4598502!3s0x6b0d4926bcb9e627:0xd95f510d7f39b402!3m4!1m2!1d151.2072744!2d-33.4523186!3s0x6b0d49138231a221:0xaf20c78b79e9db5a!3m4!1m2!1d151.2318957!2d-33.4309951!3s0x6b0d4989b4996d83:0xeae9af9b71739b59!1m5!1m1!1s0x6b0d4aaa920441e5:0x33f1be63f4680e2f!2m2!1d151.32463!2d-33.4269!3e0?entry=ttu Definitely an easy one for this cruise, meet at Cowan Truck Stop and jump straight onto Old Pacific Highway! Final stop at McDonald's which has plenty of parking all around. There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehaviour will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Thanks, I'll have to cobble something like sonicii did, will report back
    • Agree! I still believe I have the quietest 400kW+ R33 in Australia.
    • ah gotcha ill go remeasure again, thanks for all the tips. when i measured the TPS 5v reference voltage, i put my multimeter leads on 5v power and strut tower bolt, it gave me 5v with boost sensor disconnected and with boost sensor connected it gave me 1.4v. ill try remeasure again this time with volt meter both on the 5v reference and TPS signal ground wire.
×
×
  • Create New...