Jump to content
SAU Community

Recommended Posts

it's well known cars in US (even Japan) are always a good .3 -.5 sec quicker down the strip compared to what you can achieve on aussie soil - like for like

i think the main reason is the way they measure roll out, which on a hard launched awd car is a noticeable time advantage

Martin's 10.3 for eg would be close to a 10 flat on a US drag strip

a more accurate comparison when looking at acceleration times from different countries is the 60-130mph

Edited by domino_z

Its easy to make big power out of these stock engines. The trick is to keep the stock rods inside the engine over the vehicles life......

Getting a one-off drag number isnt so hard if you put your mind to it. It certainly impresses a lot that dont understand the risks, and the massive potential cost, involved

Why you would spend 10's of thousands of dollars on modifications for an extra 0.1 to 0.3 of a second over a 1/4 mile is beyond me. Especially with these kind of results with just a mid pipe and tune. A good video this one, some nice shots taken from inside and outside the car.

#! Edited by GT-R OZ

That's exactly right. People who spend that kind of money to get such a miniscule increase in performance (which they would hardly ever use anyway) don't do it because it actually makes any sense, they simply do it because they can! :yes:

Edited by GT-R OZ

Sorry off-topic.

Hey Domino, how did you install your rear diffuser fins? Did you have to drill the carbon panel under the car?

I like the look and should reduce soot on the back of the car. Did you find any difference?

Thanks.

i get absolutely zero soot daily driving on e85, that's the best solution to reducing carbon emissions..... or Martin should have the new injector end pulse tables for cobb which may help on 98 Ron

im not sure what part you're referring too

I am running the top racing carbon lower diffuser which replaces the oem part

IMG_4881.jpg

These are the hks kansai diffuser fins I bought a while ago. I haven't installed them yet, looks like you have to drill into the oem carbon diffuser. I had to paint the leading edge on both pieces matte black as they were quite rough looking with excess resin

but i can't see how either part could possibly reduce soot

nengun-3618-06-kansaiservice-carbon_rear_diffuser_and_fins.jpg

Edited by domino_z

Hey Dom -

Yup, that's the one - the Kansai diffuser fins. I thought you had installed that (saw your NAGTROC post).

Apart from the the good looks, the diffuser fins should extend the turbulent wake further behind the car at high speed, therefore reducing accumulation of exhaust output onto the rear face of the car. It should therefore reduce drag and improve rear downforce in conjunction with the rear upper spoiler.

^ Whoop-dee-do!

What would that cost the average consumer... just to put things into perspective.

Around $5K all up is what most GTR retailers will sell this kind of package for depending on existing mods already in place (ie. exhaust etc). and what brand parts they use. Not bad for a daily driven 10 second car :)

Many different kits from many different parts upgrade manufacturers to do this on these great cars. GTRs are a great base, which is why we all like them so much here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
    • No, you're wrong, and you've always been wrong about this. The Nismo has 2 sets of openings. One is a real 2-way, and the other is a 1-way. There is no 1.5-way possible with the ramps that they offer. A real 1.5-way does exist. That Cusco stuff I posted is a prime example. If the forward drive ramps are, say 55°, and the overrun ramps are, say, 30°, then you will get about half as much LSD effect on overrun than you do on drive. It is real, it realy works. OK, you're slightly right. The Nismo has 55° and 45° ramps on the 2-way, so it does offer less LSD effect on overrun. But, I think that just means that they've (probably) sensibly established that you do not want actually equal LSD effect on overrun. You just want "quite a lot, but not quite as much as the drive LSD effect".
    • Just wanted to unearth this and post my baby with the new front ❤️😝 Took her to my wedding rehearsal today. Next up is getting wide skirts (after wedding)
×
×
  • Create New...