Jump to content
SAU Community

Recommended Posts

it's well known cars in US (even Japan) are always a good .3 -.5 sec quicker down the strip compared to what you can achieve on aussie soil - like for like

i think the main reason is the way they measure roll out, which on a hard launched awd car is a noticeable time advantage

Martin's 10.3 for eg would be close to a 10 flat on a US drag strip

a more accurate comparison when looking at acceleration times from different countries is the 60-130mph

Edited by domino_z

Its easy to make big power out of these stock engines. The trick is to keep the stock rods inside the engine over the vehicles life......

Getting a one-off drag number isnt so hard if you put your mind to it. It certainly impresses a lot that dont understand the risks, and the massive potential cost, involved

Why you would spend 10's of thousands of dollars on modifications for an extra 0.1 to 0.3 of a second over a 1/4 mile is beyond me. Especially with these kind of results with just a mid pipe and tune. A good video this one, some nice shots taken from inside and outside the car.

#! Edited by GT-R OZ

That's exactly right. People who spend that kind of money to get such a miniscule increase in performance (which they would hardly ever use anyway) don't do it because it actually makes any sense, they simply do it because they can! :yes:

Edited by GT-R OZ

Sorry off-topic.

Hey Domino, how did you install your rear diffuser fins? Did you have to drill the carbon panel under the car?

I like the look and should reduce soot on the back of the car. Did you find any difference?

Thanks.

i get absolutely zero soot daily driving on e85, that's the best solution to reducing carbon emissions..... or Martin should have the new injector end pulse tables for cobb which may help on 98 Ron

im not sure what part you're referring too

I am running the top racing carbon lower diffuser which replaces the oem part

IMG_4881.jpg

These are the hks kansai diffuser fins I bought a while ago. I haven't installed them yet, looks like you have to drill into the oem carbon diffuser. I had to paint the leading edge on both pieces matte black as they were quite rough looking with excess resin

but i can't see how either part could possibly reduce soot

nengun-3618-06-kansaiservice-carbon_rear_diffuser_and_fins.jpg

Edited by domino_z

Hey Dom -

Yup, that's the one - the Kansai diffuser fins. I thought you had installed that (saw your NAGTROC post).

Apart from the the good looks, the diffuser fins should extend the turbulent wake further behind the car at high speed, therefore reducing accumulation of exhaust output onto the rear face of the car. It should therefore reduce drag and improve rear downforce in conjunction with the rear upper spoiler.

^ Whoop-dee-do!

What would that cost the average consumer... just to put things into perspective.

Around $5K all up is what most GTR retailers will sell this kind of package for depending on existing mods already in place (ie. exhaust etc). and what brand parts they use. Not bad for a daily driven 10 second car :)

Many different kits from many different parts upgrade manufacturers to do this on these great cars. GTRs are a great base, which is why we all like them so much here.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
×
×
  • Create New...