Jump to content
SAU Community

Recommended Posts

hey guys

Shell is now for sale... It wont be available for the next two weeks as im still in Brisbane and the shell is in mackay

please note - a little bit of fabrication skills would be necessary to finish a few things off on the car

Info:

Front windscreen cracked

Steering coloum shaft will need to be replaced

Stripped interior, not one bit of wiring harness front to rear

Front guards modified as per picture

Custom dash reo bar made

Custom alloy dash made

Sound deadening partially removed - just the stuff i could get with dry ice.. Some still baked on like around the gbox tunnel

Front radiator support cut out - was planning on welding a couple tabs to it then bolting it back on via the tabs

Lower front chassis brace cut out and replaced with a piece of tube to give the radiator more room and be able to have the intercoler sit upside down and have its inlet and outlet very close to the intake mani and turbo for short piping.

all fuel and brake lines have been removed

aerocatch bonnet pins

led taillights

will throw in the whole car loom and all ecus that i have.. loom is cut in a few spots and one ecu is damaged.

Thats about all i can think of at this stage

It is a registerable car

The price will vary depending what you would want to come with it, in its base form:

No driveline just suspension arms minus the cusco hicas arms and swaybars

No wheels

No suspension

No frontbar

No lip

No wing

No brakes

No 4wd Pump

$1500

If you want it to come with other parts let me know via pm or phone call and we will sort out a price

I dont really know how to send a shell interstate so im going to go ahead and say qld buyers only and i dont really have the time to transport it for you.. you will need to arrange all that yourself.. i will however help you get it on a trailer but bring your own wheels unless you are buying mine.

other parts for the car which can be added into the sale with some discounts here and there;

r33 gtr gearbox, recently rebuilt with new bearings.. has not been run since - $850

r33 gtr/gtst fuel tank, no pump - $100

r33 gtr nismo in-tank pump - $250

r33 gtr BC External Reservior coils, as new only fitted and moved 50metres - $1350

r33 gtr black oem front bar, good condition paint is scratched a bit - $500

r33 gtr/gtst greddy front strut brace - $125

r33 gtr/gtst oem rear brace, have two of these for sale - $100ea

r33 gtr carbon fibre grill with no symbol just mesh - $100

r33 gtr rear wing, carbon end caps - $350

r33 gtr front lights very good condition - $350

r33 gtr/gtst cusco hicas lockout bars very good condition - $250

r33 gtr cusco front swaybar - $250

r33 gtr moonface racing castor arms - $200

r33 gtr passenger seat, good condition - $150

r33 gtr/gtst fuel tank - no pump - 100

r33 gtr diff - $400

r33 gtr genuine autoselect front lip - cracked but quite easily repairable - $400

i still have quite a bit of the standard interior left, mainly door cards and anything i didnt destroy taking off while in a rage haha

UNIVERSAL PARTS

AME TM-02 wheels, 18x10+15 all corners on 1000km old achillies 123s semis 265x35x18 - all very good condition no gutter rash - $2300

power enterprise 800cc top feed injectors 11mm x 6 in boxes with plugs, new - $600

genuine greddy type rs blow off valve vgc - $100

buddy club fixed back seat, has rail to suit s13/4/5. black with grey inserts for a normal sized person, has a small tear in the fabric other than that its as new - $450

thats it for now..

please contact me on 0413347774

dash - note stack 8130 not for sale

http://i222.photobucket.com/albums/dd109/s...0821_131633.jpg

Nardi wheel not for sale

http://i222.photobucket.com/albums/dd109/s...0806_144503.jpg

alloy dash in this picture is the old version.. dont even look at it :)

http://i222.photobucket.com/albums/dd109/s...da/DSC_0018.jpg

http://i222.photobucket.com/albums/dd109/s...da/DSC_0017.jpg

Edited by spenda

Make me an offer im pretty flexible on pricing.. if soneone is keen for the whole project i will do a good deal

I can also deliver the car anywhere along the way from mackay to brisbane and maybe even goldcoast area but that would have to be arranged in one of my weeks off and will be the cost of my diesel to get there

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...