Jump to content
SAU Community

Recommended Posts

He Dudes!! For First...sorry for my Bad English :D

I will introduce my BNR32 GT-R. One of 25 in Complete Germany! In Germany the JDM-Scene is very small and it is very costly to import a JDM Exotic Car...Price to Buy in Japan + 10% Customs Duty + 19% VAT.....very Expansive :D

I have search for 2 Years for a perfect BNR32.....not cheaper than a BCNR33 but in very good condition!

Purchased on 25.01.2011 and a day in front of the tsunami loaded on a ship....Puhhhh!^^

I am a German "KFZ Meister" and I made at first my GT-R Fit!

In Germany we have the problem...nobody know about this Car...Parts are rare and expansive and we wait 2 month for this "hot shit"^^ nobody knows about the technical and the engine....well my first act was....maintenance for this car...

made all Clean and the wear parts new....all^^

new N1 waterpump,new N1 oilpump, HKS Timingbelt, Competition Clutch Stage 2, and and and.

The vehicle body Removed from "rust" and make new paint and seal up the underbody...

Here some Pictures...

gtruh.jpg

gtr1w.jpg

Here the first contact in Germany^^

25.png

08.png

04.png

And her after the "Bodyrepaircare"^^

64143426.jpg

50335147.jpg

53947134.jpg

80464555.jpg

41646821.jpg

94978850.jpg

88742448.jpg

84674473.jpg

bnr325.png

bnr321.jpg

bnr321.png

bnr322.png

bnr323.png

bnr324.png

bnr328.png

Link to comment
https://www.sau.com.au/forums/topic/412986-german-bnr32-gt-r/
Share on other sites

My third step was "modified" my interior and small other thinks like Nismo Carbon Front Vents....and One of 3!!!! Bride Brix II in Germany^^

engine2r.jpg

011bho.jpg

015yu.jpg

014af.jpg

013arw.jpg

65350624.jpg

0bp1070kl.jpg

0bp1350.jpg

0bp1398.jpg

66920465.jpg

56616605.jpg

92319143.jpg

26684091.jpg

97302919.jpg

0bp3692.jpg

0bp3796.jpg

0bp3800.jpg

0bp3953.jpg

0bp4055.jpg

0bp4113.jpg

0bp4122.jpg

0bp4145.jpg

At next time many things i will do but I am Happy I have placed the GT-R on the road in Germany....2 Years hard working! Made self new Lights for LHD...made sound, exhaust, engine,....certificate. The next step was more Power^^

Thanks for looking in this Thread ;)

Edited by Toho
  • Like 1

He Roy! Thanks for the post :D Yes in Germany a lot of People Drive in First Time with UK Plates but it is not 100% legally.....but a German License is possible...not easy but possible^^ I am from the near Dresden...East Germany^^ why? Do you from Australia? For Work in Germany?

My next GT-R Attack this Year is....make Engine Perfect and Cleaner, K-Sport Brakes and a Decat.....maybe small other thanks... let's see^^

Here the last Pictures^^

mg8363.jpg

with my CRX and Datsun Laurel

0bp7970kopie.jpg

0bp8001.jpg

Thank you *-*

It is great to hear this from a Country like Australia! In Germany every say "Boar its a Skyline!!!" but nobody see the work and the Details from this car....ok..a small Part (The JDM Family^^) see it. Its great for me to hear this here...Thanks!

All Pics I can get in a bigger size for Wallpaper. Write Me ;)

All photos were taken by me

Edited by Toho

Thank you ;) today i made the front new (install N1 Vents and reinstall N1 Front Lights....the Post 91 Lights only I install for the German License....Left Hand Drive Traffic conversion ;) ) and install a big brake kit 356mm on the front...pictures later...

Edited by Toho

OK come on! I am happy about a visitor from Australia! German Beer and "Bratwurst" wait for you :D I am near from Dresden in East Germany!

Thank you for the Words ;) And safe is safe :D A Datsun 720 Pickup, Datsun Laurel C230 , CRX ED9, Mercedes CLK 230 Kompressor and Skyline GTR deserve it^^

Yes...i think one of the Best Points in Germany ;) We have the "Sächsische Schweiz"....Cloud Atlas and other good Movies come from this place.....Dresden is a wonderful City and we have 3 Racetracks in the near.....but i think in the GTR we have on the "Autobahn" more Fun ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
×
×
  • Create New...