Jump to content
SAU Community

Recommended Posts

  • Replies 65
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

hows the idle and driveability with the delphi/rochester injectors mate?

still spin out how some people have nearly maxed 1000s with mid 300kw and others shooting way past 400kw....guess depends how its been tuned

No. We've had two full sets of brand new ID's dead out of the box. Read above. It's all explained there

this is the person doing the high flowing.... we were having the same dramas then narrowed it down to a certain supplier. look at the pintle if the tip is not perfectly centred chances are its from the dodgy vendor. Often the local backyard ones are also engraved 1000 or 2000 on the body.

hahahah yeh i think he has alex, i dont wanna give inn, dos anyone know what kind of gains il get outta e85 on gtss twins??? lol i dont think its worth my while. making 320rwkw on 17-18psi now and going back up for some touch up so may get 330kw if im lucky. . im not power hungry, just very curious. lol

Your high comp motor will love it. Its knock limited atm

hahahah yeh i think he has alex, i dont wanna give inn, dos anyone know what kind of gains il get outta e85 on gtss twins??? lol i dont think its worth my while. making 320rwkw on 17-18psi now and going back up for some touch up so may get 330kw if im lucky. . im not power hungry, just very curious. lol

350min on pump united

The 2000's are still fine. You just need to look after them.

We have one car that is maxing them out with 130 PSI fuel pressure............ We are just going to fit another 2 injectors and keep tuning.

How ever we are looking at alternatives at the moment. Preferably something about the 3000cc mark.

The 2000's are pretty hard to beat at the moment.

Have you had a look at moran injectors..?

https://www.moranmotorsports.com/product/500-lbhr-mre-atomizer-racing-billet-injector

Haven't tried them myself but have heard similar horror stories with the moran injectors,which is concerning considering their volumes.

Haven't tried them myself but have heard similar horror stories with the moran injectors,which is concerning considering their volumes.

allot of methanol guys seem to use them and i suppose they get away with it as so many methanol cars are tuned pig rich.... i had a few come in running running around 0.56 lambda which is crazy even if one is way off its still pig rich :P they had to spend sooo much cash on ignition just to make it pull numbers..

Have you had a look at moran injectors..?

https://www.moranmot...billet-injector

Where do you think I got the "Large Fog with 45 degree Vapor Cone Pattern" quote from... ha ha ha

I only really saw bend 8's and some high end v10/12's using moran injectors while I was in the US. The older style moran injectors were a whole different beast than they're new injectors. Most were running methanol or race fuel.

The only issue i have with them is the 45 degree spray pattern... I'm a little worried about 'washing down' or the droplets of fuel hitting the side of the port walls and becoming liquid again...

I've spoken to moran, they insist that the injectors are fine to use with ethanol.

Cheers

Justin

this is the person doing the high flowing....  we were having the same dramas then narrowed it down to a certain supplier. look at the pintle if the tip is not perfectly centred chances are its from the dodgy vendor. Often the local backyard ones are also engraved 1000 or 2000 on the body.

They were purchased directly from Injector Dynamics in the USA

All these injector problems starting to make my head spin upon deciding which way to go...

Hopefuly These companies fix these problems asap, wouldn't want to loose an engine due to Injector failure :/

All these injector problems starting to make my head spin upon deciding which way to go...

Hopefuly These companies fix these problems asap, wouldn't want to loose an engine due to Injector failure :/

You can't buy directly from ID in the states... you have to purchase from a dealer.  They partnered up with T1 for sales.

You should tell that to ID. I saw the invoice and the flow charts provided by ID. Pretty sure they were serialed too. This was about a year ago. Not sure if things have changed since then. We don't ever buy ID ourselves. I get all my injectors from a local supplier and never have a problem. Bosch, Siemens, ID...whatever. We get them all tested before using them anyway and due to the exceptionally good data logging on the new Wolf loggers, we can see problems before they become a problem. I think a lot of people are missing the point here. All these injectors are the same. There is no problems. Just get them checked before you fit them and take care of them appropriately according to what they are being used for.

You should tell that to ID. I saw the invoice and the flow charts provided by ID. Pretty sure they were serialed too. This was about a year ago. Not sure if things have changed since then. We don't ever buy ID ourselves. I get all my injectors from a local supplier and never have a problem. Bosch, Siemens, ID...whatever. We get them all tested before using them anyway and due to the exceptionally good data logging on the new Wolf loggers, we can see problems before they become a problem. I think a lot of people are missing the point here. All these injectors are the same. There is no problems. Just get them checked before you fit them and take care of them appropriately according to what they are being used for.

They are not the same there are alot of dodgy back yard ones done here, you do realise they are machined... not off the shelf items?

They are not the same there are alot of dodgy back yard ones done here, you do realise they are machined... not off the shelf items?

I'm not saying they are all the same injector. I'm saying it doesn't matter which injector is used, they are all the same ie. who cares....pick an injector. They all have a potential for problems but if you look after them accordingly and have them checked before you use them, you are less likely to have problems.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...