Jump to content
SAU Community

Recommended Posts

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2..

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

Link to comment
https://www.sau.com.au/forums/topic/413259-deca-officials-volunteers/
Share on other sites

I think there would only be a few stops left on the entry list or if not already full.

I know we have 1 motel booked solid and another filling fast.

So unless we get volunteer officials this will all be a waste of time..

So lets go people .

THE LAST DECA OF THE YEAR.

AND ALWAYS THE BIG ONE...

So once again we ask for your assistance

For this event to run SMOOTH on TIME and SAFELY we need a small group of volunteers (Officials )

to help run the day. With out the help of volunteers we can not run these days.

Officials are needed in 3 sections in the morning and 1 section in the afternoon.

All Officials on the day will be supplied with drinks and lunch.

An Officials breifing will be held before the Drivers breifing so all volunteer Officials will need to

be at the DECA complex by 8.30 am on the Saturday morning the 8th December

So if your thinking about coming up for a look and not competing this is a great way to get up close

to the action.

Also if your competing and bringing a friend or 3 it would be great if they could put there hand up

to help out on the day.

So if this sounds like you or your friends post up in here or PM me and i will will put you on the list.

Cheers WayneO.

MORNING

SKIDPAN

STARTER...Wayne ..RCHOO

TIMMER......Clive

FINISHER....Damian

MINI WANG..?

STARTER.....Campbell

TIMMER.......Kieran

FINISHER.... Daniel

MARSHAL...

LONG WANG

STARTER... Anna

TIMMER......Luke

FINISHER....Trent

SPOTTER 1 ..Stuart

SPOTTER 2.. Michael

SPARE..

AFTERNOON

SKIDPAN

STARTER.... Wayne.....RCHOO

TIMMER........

TIMMER,,,

FINISHER

FINISHER

imagezjf.gif

It still would be nice to see a few more people putting there hand up to help.

can never have enough incase some dont turn up..

Cheers Guys

Not sure if Bec has talked to you about me? As I've not heard anything from her.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...