Jump to content
SAU Community

Recommended Posts

Hi david, I made the stencil from a thin piece of plastic cut out with a small stanley knife. I firstly got the ARC logo printed out to the maximum size i could at office works which is about as right as original for mine cause i measured it before hand, Then i copied it for each letter with copy paper, copied it onto the thin plastic and cut out each letter into stencils.I measured up the erea roughly then stuck the cutout stencil onto cooler with double sided tape then spray away.

Hope this helps people it worked for me took me about 3 hours though to get it right.

I'm from nsw although I live in wa, I threw the stencil out by accident so I'll have to make another when the time comes.. U can easily make them just have to get measurements right or close enough in my case.. :) see if I were to make them for people I need sizes of letters so I can get it closest to original, mine was close although just the lettering was abit thicker which was ok more visible.

maybe your right.

Just all this talk about painting logo's or trying the stealth look I thought I would ask the obvious question.

Imagine going stealth to find out you had used a paint that retains heat. Black also attracts natural heat from light.

Edit: Just had a strange thought to piss commodore drivers off. Put the Chev logo on your FMIC - LMAO

maybe your right.

Just all this talk about painting logo's or trying the stealth look I thought I would ask the obvious question.

Imagine going stealth to find out you had used a paint that retains heat. Black also attracts natural heat from light.

Edit: Just had a strange thought to piss commodore drivers off. Put the Chev logo on your FMIC - LMAO

LOL!

Unless you can find out what paint Nissan used on the R32 / R33 GTR intercoolers...

Or ask Chris (Craved) from Craved Coatings as he would know.

I paint stripped mine cause I like the look of how the R34 GTR intercoolers came.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
×
×
  • Create New...