Jump to content
SAU Community

Recommended Posts

Hey Michael

You, as the seller have the right to ask whatever price you want, just remember that you will only get what someone is prepared to pay. If you get what your asking for then good luck to you. I wasn't trying to insult you, I simply told you what I would be prepared to pay if they happened to fit my car. BTW TE-37's delivered by dAVE $2880. Still makes these fairly expensive.

Once again good luck with the sale

Cheers

Muz

My TE37's are off a gt-r as well, they measure up 17x8 and 17x9 front/rear. I'd imagine yours are same

All GTRs should have the same wheels front and back.

NONE should have staggered wheels like that. That's probably why he sold them, as those wheels are meant for a RWD car such as Silvia/GTS-t/Cefiro/etc....

hi i'm in Perth i'll give you $1250, rims look a bit old and dirty. Plus, you can get them cheaper than what you are selling them new. Not trying to be rude, but the truth is th truth. You can get 18's new for the price you want second hand. Plus, the offset want fit a lot of cars also with that width, GTR's only i'd have to say.

Good luck otherwise.

you know.

if you people are going to be pricks piss off.

Trying to help sell something - someone might actually want these.

These arent cheap ass chromies mate. Real wheels.

Please show me where i can find these rims with tires for this price in AUSTRALIA.

New or second hand.

We cleaned the car the other day - came up really nice the wheels.

$3500 ONO

thanks - if your not intrested dont reply.

Michael

hi i'm in Perth i'll give you $1250, rims look a bit old and dirty. Plus, you can get them cheaper than what you are selling them new. Not trying to be rude, but the truth is th truth. You can get 18's new for the price you want second hand. Plus, the offset want fit a lot of cars also with that width, GTR's only i'd have to say.

Good luck otherwise.

Check your facts before posting such absolute garbage in the classifieds section again please.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...