Jump to content
SAU Community

Recommended Posts

G'day guys, well ive changed my ****ing mind again so my TD06-20G setup is up for sale

What you get is

2X Kinugawa TD06-20G turbochargers, with surge ported housing

Trust twin T67 manifold, absolute work of art, i may of furiously masturbated to this

Heaps of fittings and **** from kinugawa

2 Genuine trust TD06 heat shields, look pretty

Fatz can vouch for how awesome this is, even though he is a flamin mongrel

Message me on 0434121069

20120619_194559.jpg

427435_10150536753551256_721026255_9291900_830558087_n.jpg

crazy.jpg

10492_10151007823562882_626264727_n.jpg

:)

Link to comment
https://www.sau.com.au/forums/topic/413615-trust-twin-rb26-td06-20g-setup-2000/
Share on other sites

Sir. After gazing at your curly bits, you are most certainly exhonerated from any liability after yanking yourself over those pipes, they're horn!!

What sort of revs do those fat boys kick in at, 14,000rpm??? When Spool bring out their RB38 stroker kit that they're working on that should bring them in a bit earlier.

Any dyno figures of results?

So do they fit with stock twin turbo pipe and afms? Don't want it to stand out to the boys in blue lol, (joking) absolute work if art is an understatement, what power were u hoping for with this setup?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...