Jump to content
SAU Community

Recommended Posts

Did a bit of a search and can't seem to find anything,

Doesn't matter if it's used or new, plan on doing a 2000km drive in a few months and would like to protect the front of the car on the way down the coast.

Let me know if you have one or know of where i can find one,

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/413678-wtb-v35-coupe-car-bra/
Share on other sites

Just buy some clear 3M vinyl wrap and put it on. Car bras suck, as the dirt/stuff that gets under them rubs and can easily/quickly damage the very paint you are wanting to protect.

^agree.

Plus they're dead set ugly.

I don't really understand the concept - 2000km in one throw is not much different to 20 trips on the freeway which you'd do without thinking twice. I understand even less the people who keep the covers on to protect the car......and take it off for special occasions? It's the equivalent of plastic covers on your couch. Not having a go at you, Sean, just car bras lol.

Have a look at this site.

http://www.lamin-x.com/Infiniti-G35-Coupe-03-05-Aero-Paint-Protection-p/i001f2.htm

These are model specific, pre cut. If applied correctly, this will go on invisible - and give you protection ALL the time. Cheaper too, I'd say.

The only reason i want it is because i have done the trip before at night and i plan on doing it again at that time, when i did the trip from Brisbane to home (roughly 1000km) the front bumper was hammered with bugs and took forever to get off so i guess i'm trying to eliminate that,

I will have a look at that when i get home Matt just leaving work cheers.

The easier (and cheaper) option is to go to town with polish on the front - makes bugs come off easy as. Also a product called FW1 over whatever polish you normally use makes the paint surface like teflon and prevents bugs from sticking.

The only reason i want it is because i have done the trip before at night and i plan on doing it again at that time, when i did the trip from Brisbane to home (roughly 1000km) the front bumper was hammered with bugs and took forever to get off so i guess i'm trying to eliminate that,

I will have a look at that when i get home Matt just leaving work cheers.

sorry to say mate your going to get alot more than just bugs on the front.

went from Brisbane-> Rocky 2 months ago, roadworks everywhere (about 15 seperate sites all of them between Gladstone -> gympie).. meaning roadbase, fresh tar and stones. the car was not only compeltly brown from the roadworks, but i now have quite a number of stonechips on the front bar because of the wankers infront of me.

they are doing roadworks right now ( new bridge + re-sealing) as you exit Rocky asewll.

sorry to say mate your going to get alot more than just bugs on the front.

went from Brisbane-> Rocky 2 months ago, roadworks everywhere (about 15 seperate sites all of them between Gladstone -> gympie).. meaning roadbase, fresh tar and stones. the car was not only compeltly brown from the roadworks, but i now have quite a number of stonechips on the front bar because of the wankers infront of me.

they are doing roadworks right now ( new bridge + re-sealing) as you exit Rocky asewll.

Farrk i completely forgot about that, i will have to suss out when it's going to be finished. Might change my mind and fly..

Seano mate, keep your kms low and just fly ..... increases resale value of your car too :yucky:

Whaat? These cars are the best sports tourers on the road - they were made for the highway! I live in Canberra and my girlfriend in Adelaide - I'd probably have stuck with a local girl, but any excuse for a good drive... :D I've also gone Canberra to Gold Coast return twice in the same car when I lived there. Seriously, NO car is an investment and, anyway, the Skyline should be a religion...

Flying is for ducks!

Edited by Stuart McK

Seano mate, keep your kms low and just fly ..... increases resale value of your car too :yucky:

Already on 92,000km. It won't affect resale value when i go to sell, the range in these cars is typically between 14-22k and it doesn't move from there.

jump on RACQ's website, they list all of the road works :)

personally.... i'd be flying :P

I will check it out, the only reason i want to drive is because i'm visiting old mates from Newcastle and they want to see my car, i also like the idea of being independant and not having to scab lifts everywhere as i'll be down there for a week.

even though based on your gearbox woes you may no longer be doing this drive, i found this new product on carcareproducts newsletter that would be perfect for what you need.

simply wash car, spray on, remove with high pressure hose

http://www.carcareproducts.com.au/product/wolfs_chemicals/the_mask_spray_on_protection

Correct, i have decided i'm going to fly anyway. I don't think i'd be up for the long drive considering things like roadworks & weather (i am paranoid about driving in bad weather) and the fact that it's a very time consuming drive and a lot can go wrong.

Thanks for the information though will come in handy if i do decide to do a trip similar to this one in the future.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...