Jump to content
SAU Community

Recommended Posts

Up for sale i have my pride and joy

My R33GTST turbo coupe

Engine:

2.5 DOHC single turbo

Garret gt 35/40 high flowed roller bearing turbo

Spitfire coil packs

Big 3 core alloy radiator

Z32AFM

Big 300x600 FMIC

Custom intercooler piping 2.5inch

braided oil lines to and from turbo

188,000 Genuine k,s

Upgraded Dump Pip 2into 13inch

Highflow cat$$$$

Full Custom 3 inch stainless steel exhaust (Magnaflo) Cost nearly $2g

serviced every 10,000 using penrite 15-60Plus10 oil

Just had exhaust manifold gasket done and all turbo seals cost 700 for labour alone exhaust manifold gasket was sent over from japan and is full stainless that alone cost 260.

Major service just completed timing belt,water pump,fan belts, radiator hoses also fitted a brand new bosch 85AMP aternator,all vaccum hoses have all been redone heater hoses,manifold vaccum hoses ETC

Upgraded wastegate acturator

just had full compression test done brand new this car makes 162PSI per cyilder it is still curently making 159-161PSI per cyl so very healthy engine

new extreme brass button cutch with lightned fly wheel

Aircon regassed and is freezing

Suspension:

BC Racing race series fully adjustable coil overs done by pedders adjusted to legal height

HICAS lock bar

Brand new castor rod bushes in front

Body collar kit(alloy spaces that go into bushes to streghten and make handling better)

Factory wheels

Interior:

ADR approved sports steering whee fitted properly horn works

Calibre Boost gauge

SAAS 3 1/4 monster tacho

Front seats retrimmed in teal and black leather cost$950

Factory skyline matts in a1 Condition

Sony head unit(cd player)

Front spilts

Sony explode rear 6 1/2 200wat speakers

tinted windows re done 3 months ago front 15% rest 35%

interior is in immaculate condition with no stains on carpet or rips

Full electrics that work

Greddy H pattern stainless gear knob

SCA Alloy hand brake lever

Body: factory black 2 pac paint in VGC

Roof is a bit faded and has a minor dent in rear left quarter quoted 250$ to fix and repaint besides that body and paint is A!

Car has just had roadworthy done 1-11-2012 passed spot on not a fault picked

also had a pre check 28point safety check done by pedders on 16-10-2012 with full written report and they did not find a fault with it i have all receipts for most work done

This r33 has been dyno tuned and makes 219RWKW with 589NM Torque running E10 95Oct at 10PSI or 231RWKW@15PSI have dyno print out to prove which is also a copy in the photos on this add its a real sleeper and doesnt get any attention from police

Car will come with 3 months reg And RWC reason for sale is my girlfriend and i having a baby and not suited to us anymore is a genuine sale and i will be sad to see it go all the money is spent just get in and drive guy that dyno tuned it said it has been built for boost and would easily get up aroud the 270RWKW with a bit more boost does not burn any oil or leak any kind of fluids what so ever

Car has ran at heathcote park 12.8@101MPH

Way more to mention real sleeper car is Located in Bendigo Victoria if interested call or text anytime Carlo:0421 656 807

post-103044-0-56141300-1352937580_thumb.jpg

post-103044-0-44104900-1352937582_thumb.jpg

post-103044-0-24926300-1352937584_thumb.jpg

post-103044-0-57108800-1352937585_thumb.jpg

post-103044-0-09514700-1352937587_thumb.jpg

post-103044-0-49201700-1352937588_thumb.jpg

post-103044-0-84842800-1352937589_thumb.jpg

post-103044-0-39681600-1352937591_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...