Jump to content
SAU Community

Recommended Posts

HI Guys,

After much deliberation I have made the decision to sell my much loved Series 3 R33 GTR Vspec. I have owned the car for 3 years after buying it from my boss who imported it back in 2000. In that time i have covered just 6000km and this car has been a pleasure to own.

It drives like its new, is immaculate inside and out and will not disapoint. Will suit the most fussy buyer.

Only modifications from standard are a 3" stinless exhaust and HKS coilovers.

The car is finished in the much sought after KR4 silver and has all the standard series 3 items such as the lip, Xenon headlihts, red stitching etc.

I am in no hurry to sell this car and do not need to sell. I own the car outright and will not give it away.

Please no joy riders or time wasters.

Car is located in Adelaide and i can be contacted on 0412 486 096.

Price is $34,000.00

Thanks - Matt

post-10998-0-30416400-1353105414_thumb.jpg

post-10998-0-34190800-1353105506_thumb.jpg

post-10998-0-95434800-1353106009_thumb.jpg

post-10998-0-13333500-1353106157_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/413836-1998-series-3-r33-gtr-vspec/
Share on other sites

  • 4 weeks later...
  • 1 month later...
  • 3 weeks later...

47xxx, has a nismo dash but the condition of the interior supports this. NOte that this car has been in the country since 2000 and has spent its entire life being used spratically and was even in storage for a few years.

Cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
    • I know I have to get a wheel alignment but until then I just need to bring the rear tyres in a bit they're wearing to the belt on the inside and brand new on the outside edge. I did shorten the arms a bit but got it wrong now after a few klms the Slip and VDC lights come on. I'd just like to get it to a point where I can drive for another week or two before getting an alignment. I've had to pay a lot of other stuff recently so doing it myself is my only option 
    • You just need a wheel alignment after, so just set them to the same as current and drive to the shop. As there are 2 upper links it may also be worth adding adjustable upper front links at the same time; these reduce bump steer when you move the camber (note that setting those correctly takes a lot longer as you have to recheck the camber at each length of the toe arm, through a range of movement, so you could just ignore that unless the handling becomes unpredictable)
    • I got adjustable after market rear camber arm to replace the stock one's because got sick of having to buy new rear tyres every few months. Can anyone please let me know what the best adjustment length would be. I don't have the old ones anymore to get measurements. I'm guessing the stock measurement minus a few mm would do it. Please any help on replacing them would be fantastic I've watched the YouTube clips but no-one talks about how long to set the camber arm to.
    • Heh. I copied the link to the video direct, instead of the thread I mentioned. But the video is the main value content anyway. Otherwise, yes, in Europe, surely you'd be expected to buy local. Being whichever flavour of Michelin, Continental or Pirelli suits your usage model.
×
×
  • Create New...