Jump to content
SAU Community

Recommended Posts

Hey guys I am located on the Gold Coast, willing to post items at cost or pick up and currently have the following for sale;

R32 GTR (Will fit GTST) Aftermarket vented fibreglass bonnet, It is ADR approved and comes with approval documents, It has been fitted with bonnet pins but has the catch part and will work with r32 gtr standard bonnet catch system. The holes can easily be covered with a plate or filled in, or ready to run bonnet pins, can supply bonnet pins if req. It is professionally painted in jet black, no scratches painted underside aswell.

Bonnet$1000, Bonnet Pins $10, Bonnet hinges $40

post-44496-0-10458400-1353125161_thumb.jpg

R32 GTR Projector style Headlights L/H and R/H, also R32 GTR Indicators (All will fit GTST as well) All in perfect condition lenses mounts everything and comes with bulbs and rear covers etc.

Headlights $200pair Indicators $100pair (RH indicator has tiny crack, barely noticeable)

post-44496-0-68245500-1353125384_thumb.jpg

R32 Side Mirrors Black, R/h has slight damage as seen in pic, LH is undamaged $60

post-44496-0-52529200-1353126012_thumb.jpg

R32 GTR Passenger seat Immaculate condition, with rail, all movements working perfectly $300

Also have a std R32 Gtst drivers seat laying around in good condition for $50, and GTR rear seats in perfect condition for $120

post-44496-0-95111600-1353126251_thumb.jpg

Nismo Dash Cluster R32 GTR (320km/h and 10000rpm) (Will fit any R32) Immaculate condition with only just over 40000kms on it. $350

post-44496-0-34652800-1353126803_thumb.jpg

Momo steering wheel in perfect condition, also have an immaculate genuine horn button to fit. Steer wheel $150, Button $30

post-44496-0-93769000-1353127062_thumb.jpgpost-44496-0-21368600-1353127082_thumb.jpg

R32 Gtr Front strut Brace Avg Condition $120

post-44496-0-89412800-1353127151_thumb.jpg

Names Johnny I would rather you call or txt, otherwise please PM, avoid posting on the topic thanks

0414596256

Link to comment
https://www.sau.com.au/forums/topic/413850-r32-gtr-parts/
Share on other sites

More parts listed;

R32 GTR genuine Front Grill Very good condition $150

R32 GTR genuine front bar very good cond $300

R32 GTR genuine front lip $150

R32 gear and handbrake boots white with nismo imprint $50

R32 gtst A/C digital control unit $60

R32 GTR/Gtst centre console plastic surround $50

HKS intake kit for GTR with 3A racing pods only used for 2000km $200

Alloy 54mm radiator to suit R32 GTR/Gtst with silicone hoses only used for 2000km also have radiator brackets $200

Autometer Tacho with shift light $20 perfect working cond, with all brackets wiring req.

Plenty more bits and pieces from $20, adjustable arms etc stripping whole car including built rb26 with hks 2530's, PM or txt/call for further deets or other parts

Edited by slidinr32gtr
Link to comment
https://www.sau.com.au/forums/topic/413850-r32-gtr-parts/#findComment-6633596
Share on other sites

Gear and hand brake boots sold, as well as just the speedometer dial in the cluster, rest of cluster still for sale for $40, More Parts FOR SALE

Pwr FC hand controller $300

Power fc d-jetro map sensors and loom $300

Intercooler 600x300x100 $200 3" inlet/outlet big hks style tube and fin

3" cooler piping from twin turbo pipe to plenum $200 incl hose clamps and silicone joiners

Trust Type R BOV $300 stiff spring type

R32 REO $50

R32 Overflow bottle good cond $40

Door cards $60 pair

PM or txt for pics

Link to comment
https://www.sau.com.au/forums/topic/413850-r32-gtr-parts/#findComment-6636473
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
×
×
  • Create New...