Jump to content
SAU Community

Recommended Posts

Hi Guys up for grabs is my mint series 2 R33 which i purchased just over 2 years ago as a basically stock car (front mount and cat back exhaust) the body is PERFECTLY straight not a ding anywhere and all panel gaps are even it truely is a gun barrel straight car :yes:

Paint isnt bad but it is starting to show its age if you looks closely with few stone chips here and there as could be expected on a 15yo car though and only saying that as im VERY fussy.

I built it using nothing but the best parts with absolutely no expense spared ive only put 8000km on the car since ive owned it and mods would be lucky to be 4000km old.

There are many forum users that have driven the car and can vouch for the condition and performance of this car and it would be fair to say that this is 1 of the best "sorted" RB25 packages around it truely drives awesome in every way! This car has power everywhere Off boost performance is amazing and is very torquey indeed and when boost comes on well........HANG ON lol this car is the ultimate street setup it hooks up extremely well when throttle is controlled properly or simply lays rubber when the foot goes to the floor.

MODS AS FOLLOWS..........

BODY

No body mods original all around with staggered offset Lenso D1R's 8.5'' wide fronts and 9.5" wide rears in perfect condition wrapped in Brand new nitto invo tyresDSC_0408.jpgDSC_0361.jpgDSC_0105.jpg

DSC_0107.jpg

DSC_0207.jpgDSC_0210.jpg

INTERIOR

Immaculate R34 GTR seats front and rear

Short shifter (brand unknown)

Momo gear knob

Carbon fibre wrapped centre console

Brand new Genuine nismo mats

Factory nissan momo steering wheel (rare)

New Clarion double DIN CD with bluetooth

kenwood speakers all round 6" splits with tweeters in door

new leather centre console lid,gear boot and handbrake boot

20120923_141101.jpg

20120923_140738.jpgDSC_0648.jpgDSC_0619.jpgBRAKES AND SUSPENSION

KYB struts and springs (firm but supple ride) handles AWESOME

Cusco strut tower braces front and rear

Buddy club rear camber adjustable arms

fresh bushes throughout recent 4 wheel alignment

(setup by Josh @ wholesale suspension) previous owner of the car

MASSIVE alcon 4 spot brakes front and rear freshly powdercoated by craved coatings and rebuilt with fresh seals by specialised brakes with DS2500 pads up front pagid blue in the rears

Greddy 356mm rotors up front

Greddy 315mm rotors on the rear

Hel ADR complied braided lines

GTR master cylinder

These brakes are amazing and absolutely premium quality high end shit!

20120806_171112-1.jpg20120806_171131-1.jpg20120726_182227.jpg

GO FAST BITS

Garrett GTX3071R .82

splitfire coils

850cc power enterprise injectors

Link G4 ecu and 7bar map sensor

plumback turbosmart dual port RB bolt on BOV

HKS cam gear (exhaust)

Tomei fuel pump

turbo beanie

custom dump into Kakimoto full 3" system awesome sound when revving but very quite still on cruise

300X600 FMIC with custom stainless steel pipework fabricated by yours truely

Custom 3" stainless steel intake with K&N filter

Profec II electronic boost controller

DSC_0709.jpg

Car also has a Mongoose M80 alarm that winds up the windows automatically

Everything in this car works aircon is ice cold heater works well

Pretty sure thats everything will update if there is anything ive forgot.

As you can see there is absolutely nothing to spend on this car its got the best of everything and im gunna be extremely sad to watch some lucky bugger drive off in my pride and joy.

PRICE $19,000 neg

open to offers with out the brakes or without the 34 interior or both

ive got near new RDA slotted rotors and near new EBC redstuff pads to go back on with stock calipers

Original interior was also in very good condition with 1 tear in the usual spot on the drivers side bolster

Strictly NO test pilots or tyre kickers.

Low ball offers ignored yes i know 33's are a dime a dozen and can be had CHEAP and this ISNT CHEAP!

All parts installed by DVSJEZ and tuning by unigroup engineering

Any queries call or text Mick on 0423089277

Link to comment
https://www.sau.com.au/forums/topic/414024-mick_os-336kw-97-r33-gtst-for-sale/
Share on other sites

Car is 118XXX after the weekend will be sold fully serviced and professionally detailed.. This thing runs beautifully ran down to the gong for a cruise its great on ethanol drove from Richmond to the gong and back on half a tank just over 250km round trip! Its better on ethanol than some 98 tuned cars :)

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...