Jump to content
SAU Community

Recommended Posts

Hi guys,

I've got a s2 r33 gts-t with a wheel scrubbing issue up front.

Components wise here's what I've got on there:

18 x 9.5 +38 with 15mm bolt on spacers (think this makes it effectively +23?)

Sydneykid bilstein/whiteline coilovers

245 wide tyres

Guards rolled

The scrubbing occurs when I hit a big bump, when I transition a lot of weight onto one wheel (high speed cornering) or say if I'm going downhill and turn hard and transition onto one side etc. I think from looking at the markings on the guards, that the main issue is because this wheel and tyre combo edge sits in line with the outer guard edge, so there's not a lot of travel distance needed to make contact and relatively soft suspension. Here are some pics of where the wheel sits and the markings:

2012-11-12%2017.30.02.jpg

2012-11-12%2017.30.12.jpg

2012-11-12%2017.30.47.jpg

I have thought about doing

Stiffer coilovers

Front camber arms/bush kit

Try fit thinner tyres on same rims

Thinner rims/thinner tyres

Is it possible with some combination of neg camber and smaller width tyres to fix this, or will I need to go to a smaller rim & tyre combo only?

Ideally I'd have an 18 x 8.5 +30 on there without the spacers, but this is the most expensive option, so I thought I'd ask some experts on here first if it's possible to work with what I have.

Cheers.

Edited by copycutter

I've got 18x9.5 +20 with a 235 tyre and lowered on my 33. I have fairly stiff suspension and no rubbing what so ever in hard high speed cornering and all. Maybe try and get the guards lipped and it might give u more clearance. It's fairly cheap. Maybe 50 a corner

Ditch the spacer, or you can go camber arms and add some negative camber (doesnt look like ur running much camber at all), just depends how much camber would be required, looks like 2.5-3 degrees may do the trick and isn't too crazy? Or lastly the most expensive option of thinner rims. My advice is ditch the spacers if possible (or get thinner spacers)

I've got 18x9.5 +20 with a 235 tyre and lowered on my 33. I have fairly stiff suspension and no rubbing what so ever in hard high speed cornering and all. Maybe try and get the guards lipped and it might give u more clearance. It's fairly cheap. Maybe 50 a corner

His guards are already rolled

lose the 15mm spacers, looks like theres 15mm odd of rim sticking out, just see how well the rim clears the suspension arms etc, on the inside of the arch

hahaha We msg'ed at the same time, The only option left is different rim with smaller offset.

What size are your brakes? how do 18" not clear the brakes?

Edited by badben

They're just stock brakes, but for some reason the +38's spokes design on the CR Kai means the spokes hit the edge of the brake caliper. I've tried 5mm slip ons - still fouls. It's just the shallow design that comes with that offset. I've got 9.5 +20's on the rear and I had to initially run them up front until I got the front spacers, and they cleared easily. I've never seen bolt on spacers in 7-8mm and I'm not real keen on slip ons, especially over 5mm.

The answer is as simple as it always has been.

Only use wheels that SUIT ALL ASPECTS OF THE FITMENT. That includes brake clearance.

No point having pretty wheels that make the little girls' pants fall off if you have to fit stupid spacers to make them work.

Depends on spoke design as we'll as offset. You will need to test fit the rims unless someone else on here has run those exact rims on there r33 and can advise. Cheap option, camber arms. Expensive option different rims

Going off your pic's, your car has good clearance around tyres, maybe suspensions to soft. Allowing to much travel.

Just so you know camber arms will make your tyres wear unevenly so you'll need to do regular tyre swaps, Front to back , left to right depending on if your tyres are directional or asymmetrical

Your guards don't look very rolled to me. Lose the inner splash guards. Failing that, I have posted this before. Works great, and it's free, just take your time.

http://www.skylinesaustralia.com/forums/topic/401848-trying-to-fit-my-dream-wheels-te37/page__st__20

yeah guard doesn't look very rolled to me at all

judging by where that scubbing mark is on whatever corner that under guard pic was taken you'd have no problem if they were rolled properly

also looks like you could do with dialing in some negative camber

Edited by mystery_kid

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...