Jump to content
SAU Community

Recommended Posts

mate this feller is the go if u want any rb25/26 rebuilt I just got mine done for a absolutely amazing price I highly recommend this feller over any rebuilder in the western suburbs of sydney I won't go no other builder !!! He has done the job and he done it perfect :) I'd be taken our engines to him and him only

Link to comment
https://www.sau.com.au/forums/topic/414112-st-marys-engines-nsw/
Share on other sites

Mate it's a fully forged build all brand new brand new turbos with steel wheel obviously new fuel pump and brand new injectors yes it's will be getting run in on the dyno had experience with lots of rebuilds

Using new parts is not evidence of a good build. Bad engine builders also use new parts. He may be great engine builder, or the opposite, but if you cant mount an explanation of why you believe he's good, you're just some guy on the Internet saying stuff.

I actually know the guys at St Mary's Engines well. Geoff & Brett mainly specialise is Mopar stuff but yes they are very good at what they do, very down to earth people.

They know how to build engines. Any of the Mopar days you'll see them down at the drags.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Thanks mate, couldn't find in VIC, ended up ordering one from NSW, getting rwc to get new plates and registration done.
    • Before all the EFR fan boys come in, have a look at: https://www.garrettmotion.com/racing-and-performance/performance-catalog/turbo/g-series-ii-g30-825-58mm/ It also comes in a T4 1.06 divided housing. I would dare say if you want response & also decent power, this thing would chop.   AND apologies, just re-read your post, you've already bought the turbo... whatever you do, make sure you stick with divided housing and proper twin scroll manifold.
    • People have got to stop doing that. ShatGPT is not a search engine. It is a hallucination factory.   I also would recommend the 1.05. The .83 will "work" for you , in that it will be more responsive, but I think you'll find that it won't be anywhere near as good running it out to 8000rpm as the big housing will be.
    • Decided for the first time ever I would tow my car TO the track day on the same working theory as bringing tools and spares "if I have it I wont need it, but if I leave it behind i will 100% need it" all setup and ready to go out and try these A050 for the first time First session showed I needed to stiffen up the dampers a touch but still managed a few 1:21's without much effort. things were looking good. Came in a dropped the tyres down  to 26/28 as they had gotten to 35/33C from 22C cold The first lap of session two I managed to drop into 1:20's. Then in the second lap into the second session. Coming into T3 and I suddenly lost brake pedal followed by some huge rear end vibrations and scraping sounds. Got it back into the pits after session ended and found this. in the attached video, all of the wobble is in the hub its self, wheel is mint, and bearing feels tight. lKXLqpd - Imgur.mp4   Deciding it was a bent spindle I tried to find bearing/hub assembly locally but was unsuccessful so it was loaded back onto the trailer i luckily brought it on to drag it back home  
    • 1.05 you’ve gotta let it breath 
×
×
  • Create New...