Jump to content
SAU Community

Nismo Lmgt4's Work Xt7's And Rb26 Bits, Gt-R Rotors Etc

acsplit
 Share

Recommended Posts

acsplit Veteran

acsplit

Posted
Posted

Hey guys time to get rid of some bits

2x Nismo LMGT4's 18x9.5 + 18 ( Matt black with bit of gutter rash and crap tyres) $1050

2 x Work XT7's 4 Stud 17x9 + 18 powdercoated black with Toyo R1R tyres 95% tread 235/40/17 $1100

2x Std R32 RB26 turbo's (came off a working car I was told) $100 the pair

2x R34 GT-R STD Stainless Steel dump pipes $200 the pair

1x R33 GT-R Intake Plenum freshly stripped and powdercoated satin black $220.00

Set of GT-R Throttle Bodies $100

Pair of brand new RDA 324mm rotors ( with some surface rust but never used) $200 with a free set of endless brake pads used but lots of meat.

Set of dog bone adapters to use r32/33 caliper on 324mm GTR rotor (80% sure these are for a GTS-T $80.00

BeeR rev limiter $80.00 used

R32 GT-R engine loom in good condition $160.00

Twin turbo pipe in std silver wit elbow for rear turbo in good condition $80.00

HKS VPC ( vain pressure controller) so you can run a map sensor on STD or remapped ECU including harness and remapped ecu $200.00

I am sure there is more but this is a good start

Email me collins.andrew.acATgmail.com

or sms 0434425026

Cheers

Located near baswater vic and can post at buyers expense.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      98 R34GTT 4k engine stumble

      By MBS206 · Posted

      List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
×
×
  • Create New...