Jump to content
SAU Community

Recommended Posts

Top 10 get an invite, anyone declines, next in line is invited. Getting hard to qualift now

WOMEN

430.06 - Irena Piatrovich (IPL Worlds) WILD CARD

418.01 - Taylor Young ( WPC Worlds)

355.98 - Coralie Weir ( WPC Worlds)

338.18 - Nina Markopoulos (GPC Worlds)

310.22 - Sussy Kollen (GPC Worlds)

304.07 - Josseline Jeria (SHMC)

302.43 - Minwah Van (SHMC)

301.69 - Kelli Clarke (MT)

297.32 - Katie Tushuiezen (SS Challenge)

296.54 - Katie Foster (PR4)

291.91 - Alice Xu (SS Challenge)

__________________________________________

291.49 - Annie Rendle-Short (MT)

291.38 - Vicki Jewson (PR4)

286.86 - Cami Sadri (GPC Worlds)

284.42 - Keiko Nakai (SS Challenge)

279.24 - Marion Falla (SS Challenge)

279.23 - Tish Kerr (GPC Worlds)

278.03 - Amanda Woodward (GPC Worlds)

275.45 - Jennifer Willock (SS Challenge)

259.71 - Rebecca Zepackik (GPC Worlds)

80kg

627.5kg - Colin Webb (MT)

602.5kg - Emad Nayef (GPC Worlds)

600kg - Ben Bouchereau (PR4)

582.5kg - Luke Helm (SS Challenge)

550kg - Thibault Panassie (PR4)

545kg - Carl Sherry (SA open)

545kg - Joe Debono (ADFPA)

545kg - David Harrison (VE)

542.5kg - Greg Hills (WPC Worlds)

537.5kg - Kristos Papanotis (PR4)

______________________________________________

530kg - Joey Zhingini (MT)

527.5kg - Alexander Cochrane Davis (SS Challenge)

525kg- Dan Rucci (GPC Worlds)

520kg - Chris Van Gunst (PR4)

512.5kg - Rene Mawad (SS Challenge)

515kg - Russel Gan (VE)

511.5kg - Yue Sun (SS Challenge)

505kg - Christopher Mercoulia (VE)

505kg - Simon Bergner (HOTW)

500kg - Sammy Nayef (PR4)

500kg - Conor Zyskowski (GPC Worlds)

95kg

732.5kg - Matt Brunoli (PR4)

724.5kg - Scott Wasson (GPC Worlds)

697.5kg - Scott Hill (HOTW)

678kg - Tim Germanchis ( SS Challenge)

670kg - Jason Clarke (MT)

655kg - Matt Middleton (VE)

650kg - Max Markopoulos (GPC Worlds)

637.5kg - Amir Fazeli (HOTW)

620kg - Alen Pezerovic (PR4)

617.5kg - Zaid Faydi (SCC)

__________________________________________

615kg - Jonathon Nichols(PR4)

612.5kg - Laird Ross (PR4)

610kg - Eros Chiodo (PR4)

600kg - Justin Haller (MT)

600kg - Adam Lam (PR4)

600kg - Adam Gillespie (SHMC)

600kg - Paul Thompson (MT)

580kg - Nathaniel Hodges (Acacia Park)

575kg - Leigh Donnellan (VE)

110kg

921kg - Dan Green (Clash for cash) WILD CARD

847.5kg- Ricky Goodyear (GPC Worlds)

830kg - Nathan Jones (PR4)

775kg - Firas El Achkar (PR4)

710kg - Alex Zerba (PR4)

655kg - Nathan O'leary (MT)

643kg - Jesse McEwan (MT)

625kg - Joel McLeod (CAO)

620.5kg - Jeremy Murray (SS Challenge)

620kg - Joseph Radice (HOTW)

605kg - Brad Keogh (VE)

___________________________________________

590kg - Phil Smith (HOTW)

590kg - Gavin Turrel (SHMC)

585kg - Phil Smith (SHMC)

577.5kg - Max Riebl (SS Challenge)

562.5kg - Addison Kaye (SS Challenge)

560kg - Daniel Clayton (SS Challenge)

560kg - Dennis Vichidvongsa (HOTW)

560kg - Kym McIntosh (Acacia Park)

550kg - Alex Allen (SHMC)

542.5kg - Tudor Sava (SS Challenge)

110kg+

935kg - Wayne Howlett (GPA Worlds)

932.5kg - Odell Manual (PR4)

910kg - Adrian Tullo (GPA Worlds)

787.5kg - Jackson Murrie (PR4)

747.5kg - Con Barbakos (SS Challenge)

745kg - Jack Pollard (GPC Worlds)

732.5kg - Barry Heynes (CAO)

710.5kg - Lepeka Nanai (MT)

700kg - Adam Roe (PR4)

680kg - Alex Robertson (SHMC)

_________________________________________________

660kg - Kevin Aitkin (SS Challenge)

650kg - Paul McManus (CAO)

645kg - Michael Nicholas (WPC Worlds)

635kg - Joshua Canaris (MT)

625kg - Zoran Jankovski (PR4)

610kg - Dave Keong (MT)

585kg - Lawrence Scott (SS Challenge)

580kg - Jon Bishop (MT)

572.5kg - Sean Carrol (HOTW)

567.5kg - Mattias Skillicorn (HOTW)

Link to comment
https://www.sau.com.au/forums/topic/414886-prorawfive-qualifying-totals/
Share on other sites

Wayne Howlett set the biggest raw total in Australian Powerlifting History overnight in Argentina at the GPA Worlds

He went 375kg squat - 230kg bench - 330kg deadlift - 935kg total@130kg bodyweight

He actually stood up with a 400kg squat, but got red lighted for depth. Thats the first time in his career he has been red lighted for depth

He actually did the bench only part of the comp 2 days earlier and benched 237.5kg for a Gold Medal

He said he felt fatigued on the day, possibly shouldnt have done it

I think Wayne has a 240kg bench in him

Another 600kg+ total added to the 80kg class

Ange Galati went 200/200/220 - 620kg with a 4th attempt, 615kg@78kg officially at GPA Worlds in Argentina

Australias greatest ever bench presser. He tore his pec a week before he left and had to bench with a very close grip, still managed 200kg@78kg

I laugh when most say he's a shit squatter and deadlifter. Not really, a 200kg squat at 78kg is bloody impressive, its just his bench press is from another planet

Another 600kg+ total added to the 80kg class

Ange Galati went 200/200/220 - 620kg with a 4th attempt, 615kg@78kg officially at GPA Worlds in Argentina

Australias greatest ever bench presser. He tore his pec a week before he left and had to bench with a very close grip, still managed 200kg@78kg

I laugh when most say he's a shit squatter and deadlifter. Not really, a 200kg squat at 78kg is bloody impressive, its just his bench press is from another planet

holy shit

lol @ pressing 200kg with a torn pec... got balls!?

amazing the differences in where people are strong... more than one way to a big total

WOMEN

430.06 - Irena Piatrovich (IPL Worlds) WILD CARD

418.01 - Taylor Young ( WPC Worlds)

355.98 - Coralie Weir ( WPC Worlds)

338.18 - Nina Markopoulos (GPC Worlds)

310.22 - Sussy Kollen (GPC Worlds)

304.07 - Josseline Jeria (SHMC)

302.43 - Minwah Van (SHMC)

301.69 - Kelli Clarke (MT)

297.32 - Katie Tushuiezen (SS Challenge)

296.54 - Katie Foster (PR4)

291.91 - Alice Xu (SS Challenge)

__________________________________________

80kg

637.5kg - Amir Fazeli (HOTW)

627.5kg - Colin Webb (MT)

615kg - Ange Galati (GPA Worlds)

602.5kg - Emad Nayef (GPC Worlds)

600kg - Ben Bouchereau (PR4)

582.5kg - Luke Helm (SS Challenge)

550kg - Thibault Panassie (PR4)

545kg - Carl Sherry (SA open)

545kg - Joe Debono (ADFPA)

545kg - David Harrison (VE)

_______________________________________

95kg

732.5kg - Matt Brunoli (PR4)

724.5kg - Scott Wasson (GPC Worlds)

715kg - Scott Hill (Oceania)

678kg - Tim Germanchis ( SS Challenge)

670kg - Jason Clarke (MT)

655kg - Matt Middleton (VE)

650kg - Max Markopoulos (GPC Worlds)

620kg - Alen Pezerovic (PR4)

617.5kg - Zaid Faydi (SCC)

615kg - Jonathon Nichols(PR4)

_______________________________________

110kg

921kg - Dan Green (Clash for cash) WILD CARD

847.5kg- Ricky Goodyear (GPC Worlds)

830kg - Nathan Jones (PR4)

775kg - Firas El Achkar (PR4)

775kg - Richard Hozjan (Oceania)

710kg - Alex Zerba (PR4)

655kg - Nathan O'leary (MT)

643kg - Jesse McEwan (MT)

625kg - Joel McLeod (CAO)

620.5kg - Jeremy Murray (SS Challenge)

620kg - Joseph Radice (HOTW)

________________________________________

110kg+

935kg - Wayne Howlett (GPA Worlds)

932.5kg - Odell Manual (PR4)

910kg - Adrian Tullo (GPA Worlds)

862.5kg - Stephen Pritchard (Oceania)

787.5kg - Jackson Murrie (PR4)

775kg - Nathan Baxter (Oceania)

747.5kg - Con Barbakos (SS Challenge)

745kg - Jack Pollard (GPC Worlds)

732.5kg - Barry Heynes (CAO)

710.5kg - Lepeka Nanai (MT)

________________________________________

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...