Jump to content
SAU Community

P D S & Policy

GTR-N1

By GTR-N1,
in New South Wales

 Share

Recommended Posts

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

this will definitely be useful, as i may be inspecting a 34 next week!

The NRMA PDS has so many omissions in it > bit of a nightmare > had to rely on a 10 min phone conversation with staff.

Just Car PDS will be perused next - again, sorry for the delay to this thread as well as PMs.

darksky34 Mentor

darksky34

Posted
Posted (edited)

Well, just called up 2 brokers in Sydney. Asked about "nissan skyline".

1. Sorry we don't do those vehicles, we are a relatively small broker and only do mums and dads types of cars. =(

2. advice given: It would be much cheaper to go direct to the insurance company than to go through a broker for this type of vehicle.

also just tried to get an online GIO quote, BROKE THE WEBSITE

Learning as we go!

Edited by darksky34
GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

At last...

Just Car PDS details have now been posted throughout "Topic Headings" in Posts #2 to 11.

Another insurance company that covers 'grey imports' may be added to the above mix next week.

D_I_F Grand Master

D_I_F

Posted
Posted

GLASS BREAKAGE & LOCK DAMAGE

Shannons:- Once during a period of insurance, every glass panel is covered (fixed or moveable) without any need to pay "excess". Moulding is not covered if due to aging. Chips and cracks that do not extend through the entire thickness, or affect integrity, are not covered.

Locks, keys and barrels are not mentioned and are therefore unlikely to be covered.

See Terry here's where some of the information you are providing is incorrect.

* Shannon's will not cover sunroofs.

* Theft of keys and recoding is covered but of course limitations do apply.

I don't want to hack on this thread but I don't believe it's a good idea to be trying to provide this type of information if you don't work in this industry, especially if its incorrect.

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

Read the PS on Post #1 again!

It says that the Shannons 2006 PDS will be updated!!!

They talked to me today, and they will send out the latest PDS on Monday!!!

According to the 2006 PDS, what I've posted is correct.

You've never asked me about any experience that I've had in dealing with car insurance. In fact, you've never even PM'd me either!

I've written psycho-legal reports for victims of MVAs and sat in case conferences with both traffic lawyers and survivors. Terms of reference (including car insurance and CTP) were then furnished to me, to subsequently write reports.

evil_weevil Grand Master

evil_weevil

Posted
Posted

There is a difference in working in the industry to dealing with them

So I've gone to 5 chemists i should list about medication advice? No.

Anyway, how you interpret a pds to how someone else does to how the company does are 3 different things and is best to leave it to the individual to ring the said company. In terms of wrong info you haven't asked me for correct info on Dawes and you have left if there, as you know I'm the manager there. I don't like to advertise that cause I get people pming me for quotes, cheap prices and advice etc.

Anyhoo, last I'll post in here and my last words of advice.

- ring each insurer for quotes. Shop around

- read their pds for exclusions, limitations. Conditions, features

-compare apples with apples

- don't be price driven

Contact insurance council of Australia for other insurers.

If you deal with an insurer, make sure they are part of the code of practice. More rules insurer deals with.

If you har a complaint, write to them first. Then if not satisfied go to higher management/IDR process. If

Not rectified ten financial ombudsman

What I'd do for this thread is link all pds and point out what pages all details are on so there is no chance of slight interpretation, make everyone read it themselves!

Cheers

GTR-N1 Grand Master

GTR-N1

Posted
  • Author
Posted

Read?... Read?... Read?

Read is different from understand is it not?

Isn't the intention of an insurance company to furnish a PDS to be understood as well as read?

Surely, an insurance company would never ever draw up and distribute a PDS that couldn't be understood! Never!

So if one is to understand a PDS, how can he/she not compare one to another before making a decision?

I've spent hours joining the 'dots' and the PMs I've been getting tell me it's been well worth it.

VOILA!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • GTSBoy
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By GTSBoy · Posted

      I don't think the shuffle can damage the turbos. It only happens at low shaft speeds and loads. It's just annoying (to some people - others are tickled by the effect) and it quite possibly reduces spool performance a little bit.
    • Murray_Calavera
      Steps to DIY sanding car back ready for respray....

      By Murray_Calavera · Posted

      Oh dear. The panel beating needs to be done before the filler work. Do you have a photo of the dent before you started? Hard enough to not flex and only hit the high spots?  What do you mean it was just temporary? 
    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      Can u check this way it works for power supply?
    • Manur33
      Vag Coil Diy loom wire guage selection

      By Manur33 · Posted

      These coils draw 10amps that what i read online
    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
×
×
  • Create New...