Jump to content
SAU Community

Recommended Posts

  • Replies 136
  • Created
  • Last Reply

Top Posters In This Topic

Thanks mate :rofl: If the weather holds up I'll get to try out the Nittos tommorrow.

Yes, very true. Stock and modified GT-Rs are very different beasts to tame, naturally stock being the easier of the two.

Emre- they're very impressive times there, 124mph!!!! I guess if I get my 60' times in the low 1.73, I might gain a tenth of a second or two.....

Calder was fantastic last night, had a total of about 7 runs, not that many cars, and perfect weather.....

  • 3 weeks later...

Penfold- yes bolt straight up, providing u get the kit which suits the rb26.... From what I've heard they are an awesome turbo, very responsive and make good power.....

Anyone here wanna share their experiences with these turbos?? *looks at vspecv*

A good friend of mine is running a single AX53B60 on a Pulsar GTi-R - this thing is a rocket! Lag? What lag!? Full boost by 3000rpm! He also confirmed they are about the same as the HKS 2530 - perhaps a touch better.

Just wondering who you have had good tuning experiences with in WA as I may be looking for someone soon.

The best in the west certainly does not use dynapack and his dyno dynamics dyno is extremely accurate - if anyone can reduce a chart I will attach my latest chart (not the one below)
i have only fitted them to 1 car a customer running a motec, but they were awesome. better than 2530s, peak power pretty much the same, just more responsive.

Hmm.. that's very interesting: less lag is always good :P Anyone got actual figures, or better yet, a comparison between the two?

LW.

  • 3 months later...

hi got the t78 which spooled up round 1bar on 5500, what type of power figures are the t517zs you have rated at in total as a pair 600hp 650hp 700? and at what boost? might be worth swapping to keep it all undercover thats all.

:cooldance

Penfold- yes bolt straight up, providing u get the kit which suits the rb26.... From what I've heard they are an awesome turbo, very responsive and make good power.....

Anyone here wanna share their experiences with these turbos?? *looks at vspecv*

Hi Emre,

Its not that I want more power (not yet!!), I was just stating that how the JMS drag car can get 381 rwkws on 1.3 bar boost?!?!?!?

they usually run a mixture of toulene, acetone and avgas, you could say its rocket fuel... it makes ALOT of difference to the output of the car, much more boost and timing can be fed into the engine without detonation coming on, and thats how they make there power

they do it with most of there dyno runs, marketing i would assume, as not many people know what fuel they run and all they see is there power figure

they made 293rwkw on an sr20det silvia with a single T517Z, fuel ratio was as below:

avgas:toulene:acetone -----> 6:3:2

hi got the t78 which spooled up round 1bar on 5500, what type of power figures are the t517zs you have rated at in total as a pair 600hp 650hp 700? and at what boost?  might be worth swapping to keep it all undercover thats all.

:cooldance

The T517Z's are rated at 600 hp, got my engine rebuilt last month and got dynoed a 335rwkws at 21psi...... full boost by 5000rpm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...