Jump to content
SAU Community

Recommended Posts

Fitted tow points and stickers required for the Snowy 1000

Washed it, Drove it, got it covered in bugs and then washed it again.

Filled up with E85 for next weekend

Where you in fyshwick today? Saw a white 260rs today.

Where you in fyshwick today? Saw a white 260rs today.

Yeah man probably me. White, not too low, big rims - grey centres/polished hoops, fairly loud exhaust, no tint on the front windows and if you saw me at low speed Alcons on the front.

  • 3 weeks later...

Hooked up sat nav and mic. Also cleaned up all the dodgy wiring while I had the whole dash out. Last thing left is the reverse cam and finish off the double din surround fascia. Even put up a custom GTR wallpaper.

Edited by cpark
  • Like 1

Installed a new fuel pump in the cressida after the walbro bit the dust. Bit of a pain to do as you need to take the towbar off and pull the tank out.

Edited by k_d
  • 3 weeks later...

Adr approved Jeremy?

Who knows - cops not gonna like it regardless. Just like they're not going to like every other mod on my car. Also, given it's FRP it's not going to have the hazardous shatter like CF bonnets do. In short - no idea, but probably not.

Edited by RosieR34

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...