Jump to content
SAU Community

Recommended Posts

  • Replies 367
  • Created
  • Last Reply

Top Posters In This Topic

January - DIYMik or a Group shot from raised position ?

February -

March -

April - S T A R 3 3

May - Shell

June - Manuel Kasko

July - Not a Pulsar

August -

September - GTRKat

October - Deziner

November -

December - Anfanee

I guess we could double up here and there, depends on final numbers? Shouldn't have to make it only 1 car per month. 12 aint many.

I also was kinda thinking if we could have thumbnails of all the cars across the top of all pages and change which of them is then blownup below.

Will SirSmokey32 be entertaining the idea of having a 32GTR and a 34GTT in there? Praps 2 spots?

Is Troy's Orange van gonna be in too? or the purple liner?

I've just detailed 4 cars including my GTR, GTT, VTiR, Magna Sports and tomoz will be M<atts Evo VIII.

Happy to share how I do eeeet.

Cejay - how bad is it. Only ask coz I attacked one today and came up ok.

gave it a light cut and it took off the calcification and mended the paint.

Got a fairdinkum buffing tool etc..

Did the wash, Clay bar, wash, very mild cut, wash, detail finisher stuff and 2 x waxing.

Thanks Richard. Are you doing that by habd or with a buffer?

Bit of both for the mild cutting - depending on the need.

The roof and bonnet of the Magana sports was farked so needed to use the buffer.

I've just detailed 4 cars including my GTR, GTT, VTiR, Magna Sports and tomoz will be M<atts Evo VIII.

Happy to share how I do eeeet.

Cejay - how bad is it. Only ask coz I attacked one today and came up ok.

gave it a light cut and it took off the calcification and mended the paint.

Got a fairdinkum buffing tool etc..

Did the wash, Clay bar, wash, very mild cut, wash, detail finisher stuff and 2 x waxing.

The roof has what appears to be calcification on it. Perhaps I'll try and see if I can cut and polish it myself, although I havent done it before.

I was going to say if you did all of that by hand you must have some serious wax on wax off Karate Kid action going on!

All by hand except the magna . I am sore :/

Well worth it Cejay. Do it with a mild cut and by hand to start with. You can do it as many times as you like to get the desired result.

It's not harsh. When I first did it I thought I might burn the paintwork but you'd have to have a serious cutting compound and a buffing tool set on high.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...