Jump to content
SAU Community

Recommended Posts

3'' cat back exhaust for r32gtst, mandrel bent, mild steel, as new, 3'' stainless muffler, includes 3'' high flow cat $500

rb25 plenum lower half runners sold

rb25 injectors, fuel rail, reg and wiring $150

rb25 crossover pipe with BOV $50

std cam gear rb $20

rb25 throttle body no tps,sold

rb20 throttle body no tps $40

std rb25 exh manifold $50

r32 power steer pump good condition, hicas type $50

r32 hicas rear steering rack $50

R32 airconditioner condenser/pump and all hoses etc $100

rb20 rocker cover gasketbrand new from nissan $40

r32 gtst front seats very good condition $100 the pair

r32gtst rear seat compete, very good condition $100

also have a set of brand new r34 gtt shocks with springs $150neg

r34 gtr front shocks and springs $150neg

I have set of height and damper adjustable coilovers to suit r33/34gtr, in very good condition and not as harsh as many but still give very good handling $900, will post pics soon

these can also fit r34 gtt, the rears are perfect and the fronts with my supplied spacer plate will fit fine but are very low and scrape slightly on hard lock, but if you like it low and are carefull they will be ok

will ship at buyers expence but for some items adeliade buyers prefered, email [email protected] for pics or to negotiated on price

Link to comment
https://www.sau.com.au/forums/topic/41606-3exhnismo-coilovers-3334rr32-seats/
Share on other sites

Can the height and damper adjustable coilovers fit an R32 GTR? Also, how is it exactly, I don't think they would be as low as mine right now but need to know because I'm looking at raising my car a bit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...