Jump to content
SAU Community

Recommended Posts

hey here is one of the clips of my dr30 @ sandown on sunday the 23rd a very hot day so only did 1 or two hot laps per session this clip was making a small mistake out of the final turn but i thought it looked good on camera and felt like sharing

the car performed really well..

th_MVI_0426_zpsa942a0ea.jpg

my first video upload hope it works

Link to comment
https://www.sau.com.au/forums/topic/416231-track-day-dr30-clip/
Share on other sites

have you had temp issues with your fj? cause in general mines been really good it hardly gets much past 60-70 deg at the thermostat on hot days (just street) sunday was 30+ 36max i think and it was creeping toward 100 at thermo after hotlaps but cooled back to 80-85 after a cool down lap..

i have got a VN alloy radiator fitted plus using water wetter and a good large thermo fan + i cleaned it all out in preperation for the heat

ill be fitting an oil cooler before the next time out though regardless of the heat as i want to do many more track days in it

Yea thats pretty good.as long as it cools down !

When I had a fj (like 8 years ago) :( it got hot once and popped the head. I had to source a new head for it it was that gone. Only had stock gauge

Put the head on and bottom end went.

That's when I went Rb.

Water wetter is good stuff.

Oil cooler drops temps heaps and a must if u going to Kane it.

Btw car sounds mad. I want a fj

Sorry for the hi-jack but while on the subject of temp issues... I've got some issues. Overheated on shakedown drive after dyno tune up an angry hill overflow spewed almost 1/2 a litre stock gauge around 2/3's..

Got thermo fan and temp gauge checked out and apparently sweet. Was told that my rad is prob 50% blocked so removed aircon condesor. Now takes ages to get up operating temp by then heatsoak sets in on the stock intercooler (10.5psi). Gauge is 1/2 way in traffic.

I want to rig the standard secondary fan to kick in with the primary and a bit earlier. Is the thermostat located on the top tank?

Help appreciated is my daily atm just ordered an adaptronic and cactus engine is the last thing I need.

how hot did you get it though ydr? 100deg under pressure so i understand it is ok.. it was good at cooling it self back to the 80s..

ps d-limo thermostat is in the housing on the engine that the top radiator hose attaches too

Yea 100 deg is ok. Wouldn't want it higher thou. When I'm drifting it will sit around 90-100.

Like u said but depends on the day I prefer winter skids for that reason.

I cooked my fj hard dude Off the clock. Stock gauge.

Young and dumb ( dumber lol) was on the brake for ages looked down and yea she was cooking.

D-limo. Get a eBay r32 alloy rad. Cheap dude. Don't bother w the fj rad.

Standard fj thermo s arent the greatest so I'd upgrade them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...